Tracking control system

Tracking control system

TCS, whose full name in English is the Traction Control System, is a tracking control system that determines whether or not the driving wheel slips according to the number of rotations of the driving wheel and the number of rotations of the transmission wheel. When the current value is greater than the latter, the driving wheel speed is suppressed. An anti-skid control system. It is very similar to the ABS mode of action. Both use sensors and brake regulators.

When the TCS senses that the wheel slips, it will first pass through the engine control computer to change the engine ignition time, reduce the engine torque output or apply a brake on the wheel to prevent the wheel from slipping. If the slippery condition is serious, then Control engine oil supply system. When the TCS is in use, the gearbox will maintain a higher gear, and when the throttle is aggravated, it will avoid sudden downshifts to avoid even more slippage. The biggest feature of TCS is the use of existing ABS computer, speed sensor and control engine and gearbox computer. Even if the spare tire is replaced, TCS can be applied accurately.

The difference between TCS and ABS is that ABS uses a sensor to detect when the tire is locked, and then reduces the braking force of the wheel to prevent it from being locked. It will quickly change the braking force to keep the wheel coming soon. The edge of the lock, and TCS is mainly used engine ignition time, transmission gear and oil supply system to control the drive wheel skid.

TCS is very helpful to the stability of the car. When the car is driving on a slippery road, the car without TCS is easy to slip when accelerating. If it is the rear wheel, it will cause tail flick, if it is Wheels, the direction of the car is easily out of control, causing the car to shift to one side, and with TCS, the car can avoid or reduce this phenomenon in the acceleration, keep the car in the right direction. In the TCS application, it can be seen in the dashboard whether there is slippage on the ground. It has a control knob. If you want to enjoy the pleasure of your own control, you can turn off the system at the right time and the car will restart. TCS will be automatically released.

UTECH Vision Localization/CCD Series include Laser Machine with CCD, Cnc Router With CCD, Laser Plotter With CCD, Oscillating Knife Cutter with CCD, etc.
Performance characteristics:
    Support for custom AOI, lower resolution to increase frame rate.    
    Gain, exposure time and white balance programmable settings.    
    Three working modes: continuous acquisition / soft trigger acquisition / external trigger acquisition.    
    Support for exposure completion event notification.    
    Output flash sync signal for precise synchronization of exposure and fill light.    
    Support adjustment of packet length and packet interval, optimize multi-machine simultaneous acquisition and transmission.    
    Support for lookup table, parameter group function.    
    Provide color correction to improve the color reproduction of captured images.    
    Rugged all-metal housing and cable locking device.    
    Support single cable transmission up to 100 meters.    
    Supports GENICAM and GIGE VISION for direct connection to third-party software such as HALCON and LABVIEW.  

Vision Localization/CCD Series

3.2KW High Precision Spindle,Oscillating Knife Cut,KT Board Carving Tool,Corrugated Carboard Cut Device

Shandong U-May CNC Technology Co., Ltd. , https://www.sesamecnc.com