On May 12, the China Automobile Association released production and sales data for April. In April this year, production and sales decreased by 8.9% and 11% respectively compared with the previous month. Compared with the same period of last year, the output increased by 0.6%, sales volume decreased by 0.5%, and the growth rate of production and sales was Fall back. On the contrary, independent brands have shown a growth trend.

The data showed that in April, the production and sales of automobiles were 2.079 million and 1,994,500 respectively, and the production and sales data decreased by 8.9% and 11% respectively. The year-on-year growth was 0.6% and the sales volume decreased by 0.5%. From January to April, the production and sales of automobiles were 8,280,800 and 8,144,800, respectively, an increase of 4.1% and 2.8% over the same period of the previous year. The monthly cumulative growth continued to fall, down 4.9 and 6.3 percentage points from the same period of the previous year.

In this regard, the China Automobile Association believes that in accordance with domestic market sales practices, March is a peak, April and May should be a monthly downward trend, mainly affected by market consumption behavior. Another feature is that passenger cars can maintain growth by SUV and MPV, which also indicates that the current market is further subdivided. Overall, the consumption of passenger cars is actually supported, so the total size can be guaranteed without significant fluctuations.

It is worth mentioning that the market share of China's own brands is gradually rising when the total growth rate slows down. The data shows that in April, Chinese brand passenger cars sold a total of 686,400 units, a year-on-year increase of 14.3%, and the market share increased by 3.8% over the same period of the previous year. Among them, the Chinese brand SUV sold a total of 238,800 units, an increase of 91.2% year-on-year, and the market share increased by 11.5% over the same period of the previous year. Chinese brand MPV sold a total of 144,100 units, a year-on-year increase of 24.3%, and the market share increased by 1.5% over the same period of the previous year.

Auto Parts

ZXZ Auto pares The products which manufactured by our company such as Gear Blank ,gear sleeve,cam,2nd and 3rd generation hub bearings, Vane Of Oil Pump, Vane Ring Of Oil Pump, Shaft Sleeve ,have been widely used in gearbox, engine, hub of automobiles, and we are cooperative with customers from Audi ,GTMC,VW,DPCA,SAICMOTOR,FIAT, Hyundai. Forgings are produced by 1000T+1600T electric screw press machine, using medium frequency induction heating and full automatic operating by robot , and Japan MANYO1300T walking beam forging equipment for high quality assurance, has lower allowance, advantages of materials saving and better metal streamline. Use Swiss Hateubr high-speed forging equipment AMP30S, in order to avoid the risk of water caused cracks munting with lateral unloading system on the equipment, has advantages of lower allowance, better parallel and concentricity, no end face burr and chamfer defects happened.