Drive is a place where every manufacturer needs to pay special attention when remanufacturing a vehicle, and it is also a place where every car-buying friend is very concerned about. This is also true for bulk feed trucks . However, as far as the bulk feed carriers on the market today are concerned, there are different ways to drive them, which raises some questions for everyone's choices. So what are the driving methods used by bulk feed carrier manufacturers?

In general, there are three main driving methods used by bulk feed carrier manufacturers:

1. The first driving method is a hydraulic bulk feed truck: This type of truck is mainly equipped with a feed tank on its original chassis. Its dedicated facilities are mainly composed of tank assembly, conveyor system, hydraulic system, electric system and pneumatic sub-warehouse. And there is a gate at the bottom of the tank, and a horizontal screw conveyor is installed under the gate. When the hydraulic bulk feed carrier is in work, the power takeoff device is firstly driven by the power output of the automobile gearbox, and then the high pressure oil pump is driven to drive the hydraulic system. The hydraulic motor drives the blade shaft and the blades of the horizontal screw conveyor to rotate through the transmission device. After the active transport system, the feed can be output.

2. The second type is the gas unloading bulk feed carrier : The so-called gas unloading bulk feed carrier is a high-volume gas delivery technology used in this type of vehicle. It has low pressure, fast material unloading speed, low noise, and long transmission distance. , low residue and no pollution to the material. This kind of driving style car is widely used in different types of aquaculture companies, feed processing enterprises feed transportation, it is a good solution to the long-distance transport problems. In addition, the gas unloading bulk feed vehicle can also realize the process of feeding the feed tower without entering the field, and solves the problem of prevention of the most serious vehicles entering the farm.

3. The third type is the bulk feed carrier using electric augers: This kind of driving method is different from the two methods described above. The cost performance of this type of vehicle is relatively high, and it is favored by everyone. This kind of driving method is suitable for small farms and feed factories with narrow road conditions.

In the above content, we can clearly understand the driving methods adopted by today's bulk feed carrier manufacturers. At present, there are mainly three types: hydraulic type, gas discharge type, and electric auger type. These three different driving methods have their own characteristics. When you choose, you can make purchases based on your actual situation.

The Biomass Pellet Machine is our patent product. It is vertical ring die type. It can make biomass pellets from various materials. Its design is mature and reliable. By Wood Pellet Machine, raw material is feeding vertically and directly in place, with stationary die and moving roller, the material is centrifugal and spread evenly around the die. The independent ejection device ensures the forming rate of pellet, the good design lowers the consumption and enhances the efficiency. It can work 24 hours and lubricate automatically. More than 200 wood pellet lines in and abroad have adopted this machine. 

Biomass Pellet Machine

Biomass Pellet Machine,Biomass Pellet Making Machine,Biomass Wood Pellet Machine,Biomass Fuel Pellet Machine

Shandong Kingoro Machinery Co., Ltd , https://www.kingoromachinery.com