Some drivers use the anti-mine anti-explosion vehicle when the idling body will tremble, accelerate the vehicle speed is not fast, fuel consumption has suddenly increased. If any of these conditions occur, it means that the engine has more carbon deposits that need to be cleaned. Therefore, to reduce or effectively prevent the production of carbon deposits, it is necessary to reduce the idling speed of mining explosion-proof vehicles.

The pistons of the mine explosion-proof vehicle engine are not synchronized. When the vehicle shuts down, the cylinder intake valves of the engine cannot all be closed at the same time, and the oil emitted during this working cycle cannot be recovered in time. Some unburned The fuel will continue to be vaporized and oxidized, producing some softer black carbon deposits in the intake pipe, especially behind the throttle. When the valves form a carbon deposit, each time fuel injected into the cylinder is absorbed, the concentration of the mixture that really enters the cylinder becomes lean, resulting in poor engine operation. When the vehicle is idling, the vehicle body trembles. When the vehicle accelerates, the speed of the explosion-proof vehicle is not fast. , Fuel consumption also suddenly increased and other anomalies.

Some owners think that high-quality oil will have better quality. In fact, this is not entirely correct. The label only represents the octane number of the oil and does not represent quality and cleanliness. Mine explosion-proof cars to reduce carbon deposition, proper addition of diesel detergent will have a certain effect.

"Dismantling the mine explosion-proof car engine is definitely the most direct method, but if the engine is dismantled because of too much carbon, it will inevitably affect the service life of the engine. It will not be worth the candle." Some owners are used to idling, and they will idling Reducing the flow of air into the engine, so that the erosion of carbon deposition is also very weak, it will promote the deposition of carbon deposits, therefore, to reduce the idle speed, multi-run high speed is a very good way, this is also people often say pull High-speed, high-speed pulling is the use of gas flow against the inlet scouring to prevent carbon deposition.

In the process of using mine explosion-proof vehicles, idling is inevitable. However, in order to reduce the occurrence of explosion-proof cars in the future, it is best to reduce idling speed.

SHANTUI brand 18 Ton Diesel Forklift which model is SF180 is widely used in ports, docks, steel mills, stockyards, airports, underground mining areas, logistic parks, etc. It`s powerful and efficient for transporting and loading heavy items and containers between short distances.

The overall design of the whole forklift is advanced and the structure is reasonable. The chassis adopts the international mainstream configuration, the quality is reliable and performance is advanced. Hydraulic system adopts integrated multi-channel valve, high integration, energy saving and good maintenance. The cab adopts hydraulic tilting structure and tilting type hood to improve the maintenance performance, internal design layout fully comply with ergonomics, operating environment is more comfortable and safe, greatly reduce the labor intensity of drivers.

Advantages of 18 tons forklift:

1.    Engine

Adopts USA Cummins QSB6.7 full electronic control engine, in line with European â…¢ emissions standards, powerful, advanced performance, high reliability, low fuel consumption, maintenance is convenient.

2.    Hydraulic System

Choose the American PARKER products. High integration of hydraulic system and convenient maintenance; Pilot remote control, maneuvering light and saving power; The system is equipped with a thermo-controlled cooling device, which can meet the requirements of high intensity and high reliability.

3.    Transmission System

The German ZF 3WG171 electric liquid control gearbox, power cut function, make the micro-dynamic control easier to realize; Fault code display, which can quickly query the cause of failure by fault code, greatly simplifies maintenance.

4.    Electrical System

Adopts CAN bus technology, the controller can transmit the fault information to the monitor in a timely manner, display its fault code and alarm in the form of flashing alarm lights, and have the function of historical fault inquiry. Integrated electric control module for easy maintenance; Walking control can be performed manually and automatically according to personal habits.

5.    Cab and Operator Station

The operating pedal and handle position are designed according to ergonomic principle, and the operating environment is more comfortable and safe. High setting (seat height), large glass area, better view, can reduce labor intensity greatly; Warm and cool air conditioning.

Shantui products including diesel forklift, Electric Forklift, heavy duty forklift, Gasoline Forklift, container forklift, Side Loader , Pallet Truck , Construction Machinery including shantui bulldozer, Wheel Loader , crawler excavator, road roller, generator set, motor grader, truck crane, construction machinery parts, Shantui Parts , Cummins engine parts, komatsu parts, and other machinery parts.

18 Ton Forklift

18 Ton Forklift,18 Ton Forklfit Truck,18 Ton Heavy Forklift,18 Ton Container Forklift

SHANDONG VOLIN HEAVY MACHINERY CO.,LTD. , https://www.shantuimachinery.com