Iveco ambulance
There are many types of ambulances, and the corresponding models are classified. Here is a brief introduction to Iveco’s custody of ambulances. Iveco surveillance ambulance NJ5048XJH39 (high ceiling), external dimensions: 5620 × 2000 × 2790 mm, total mass: 3550kg, trim weight: 3095kg, front suspension/rear suspension (mm): 1000/1310, engine type SOFIM8140.43S3 . Ambulance monitoring configuration: ambulance dedicated lights (bar blue lights), strobe lights, international ambulance signs, red cross, exterior, partition (glass sliding window), walkie-talkie, power outlet, oxygen device, humidification Equipment, trash cans, floors, sinks, seats, safety belts, integrated medical cabinets, power control panels, leakage protectors, air conditioning, warm air, lighting, overhead armrests, ventilation fans, infusion stand, disinfection lamps, automatic Stretcher, simple stretcher, stretcher fixture, stainless steel baffle, etc. Iveco ambulance baodan A39, technical parameters are as follows: Overall dimensions 5580 × 2000 × 2770mm. Total mass: 3950kg, Curb weight: 3080kg, engine model sofim8140.43s3. The monitoring configuration: the main configuration: integrated interior trim, automatic boarding pedals, lockers, doctor's seats, nursing staff seats, dirt barrels, special medical floor, oxygen system, hidden infusion hooks, stretcher Devices, first aid kits, electrical appliances and control systems, parking sensors, rear door surveillance systems, etc. Emergency equipment or other equipment may also be configured according to the needs of the user. The advantages of the vehicle are: The medical rescue cabin is designed for the characteristics of ambulances, and is professionally designed and developed by Italy. It is fully functional and user-friendly. It is the cutting-edge work in current domestic medical ambulances and is suitable for emergency use in hospitals and emergency centers. The critically ill patients were rescued, supervised and transported, as well as emergency rescue at the scene of accidents and medical emergency rescue at major events. NJ5048XJH32 Iveco ambulance ambulance, the main technical parameters are as follows: Overall dimensions: 5620 × 2000 × 2790mm, the total mass (kg): 3550, the curb weight (kg): 3095, front suspension / rear suspension (mm): 1000/1310. The supporting devices for this surveillance ambulance are as follows: Popular ambulance appearances and front warning light stands, integrated medical cabinets, sealed partitions (glass windows), ready to place ventilators, monitors, defibrillators and other locations, electric Washbasin, medical ambulance seat, family escort seat, oxygen delivery system, patient status display system, automatic stretcher on board, infusion stand, UV disinfection light, front and rear intercom system, spray sterilizer, forced ventilation system, UPS system, onboard The battery group is equipped with armrests, alarm light control panel, spotlight control panel, fire-extinguishing equipment, medical capsule medical film, pulser, long diamond warning light, automatic charging system, and leakage protection system.
CNC Hydraulic Flat Bar Punching, Marking & Shearing Machine
CNC
Hydraulic Punching Machine for Plates
POWER: Three phase four
wire systems
AC Voltage: 380 V /415 V
Fluctuation of voltage: ±5%
Frequency: 50Hz
Local working temperature: 0-40℃
Used for punch and mark of joint plate in the field of iron tower. It is also used to punch and mark metal plate of other trade.
Unloading Conveyors
The Feeding Conveyors (Double linear guide with rack gear in
middle, high precision)
Y Axis Main Machine Wove Back And Forth By Double Linear Guides
Double leaner guides feeding and NC feeding carriage
Automatic Feeding Carriage
Work Pieces
Product Feature:
1. The machine-frame is made by C-type plate
welding, with good rigidity and big handling space. The machine sets three
die-stations (among them, one is the marking die-station), automatic switching
die-stations. Clamping system can adapt to different work piece, with zero
baffles as datum mark, and work piece supported by rolling-ball working table.
Axis X & Y action should be controlled by servo motor and ball-screw
driving, and double-axis CNC system controls the position of punching, so as to
make the whole machining process automatically; operator may input the sizes of
work piece to computer for repeated calling program in the future.
Our Service
Our Certifications Flat Bar Punching Machine,Flat Plate Punching Machine,Flat Bar Shearing Machine, Flat Bar Hydraulic Press Machine Shandong Sunrise CNC Machine Co., Ltd , https://www.scmcnc.com
2. Adopt CNC technology, servo motor
in feeding, with high efficiency, stable work piece precision.
3. Important functional components
adopt modular assembly, easy to repair it.
4. Carry out punching, marking and
drilling on the one plate.
5. Drilling unit has the functions
including rapid falling, slow work-feeding and quick feeding back to improve
working efficiency.
6. Easy programming, may input the
diameter of holes, position and the quantity of work piece to computer, and
also may use the program generated by lofting software, or adopt direct
conversion CAD/CAM.
7. With function of self-diagnosis for
failures.
8. Lighten the working strength of
workers.
Installation:
The seller shall send one engineer to the buyer's country for installation, commissioning and training. The buyer is responsible to provide all necessary equipments for handling and lifting the machine parts before seller's engineers go to the buyer's plant. In addition, the buyer should provide workers to support in installation activities, under supervision from the seller's engineers.
Commission:
The Supplier should give drawings and other details of material/preparation required for installation of machinery which the buyer has to prepare and keep ready before the machine arrives at the buyer's factory. Installation and commissioning can be finished within 5-10 days for above machine generally.
Training:
Training will include training on computer programming, machine operation and troubleshooting. The training time is at most 5 days for this machine.
The buyer should arrange no less than two people for accepting training. After training, the buyer should sign the "Receiving & Inspection Report" supplied by the seller to demonstrate the successful finish of commissioning and acceptance of the buyer.
Our Company
Factory:
With the development of SUNRISE, now our company has occupied important position in this industry. Due to the orders and sales performance is continuously improving, in order to better development, to meet customer's demand, and to provide customers high-quality equipment with the shortest time, our company have bought the new site, the area about 50,000 square meters, this will make sufficient preparation for development of our company and every customer.
Workshop:
Quality make brand, honesty win market, harmony converge talents, and innovation promote development. Our ability to consistently provide innovative, high quality products that outlast and outperform the competition, is why we are the one of the most successful companies offering the most advanced and productive solutions in the CNC machine industry.
Warehouse:
Manufacturing customer oriented products has always been our supreme concern. We believe that quality is the soul of an enterprise forever. Therefore, we never compromised with the quality of our products. We adopt advanced, scientific modern management ideas and system to realize supervisory control among all aspects of produce, inspection, sale and service etc., which help control quality, increase work efficiency and guarantee products' stability, reliability and precision. Therefore, the enterprise can achieve rapid and sustainable development.
Team:
We are a team of experienced and dynamic professionals who are experts in handling precision work through scientific processes. The professional excellent talents unite a powerful and creative team of design, research and development, which build our solid technical strength and competitiveness. And our company is developing fast and supply specialized service to all customers.
SUNRISE is focus on quality and company's image. We win market with good quality and service. The company has already passed International Quality Management System ISO9001:2008 certification for many years and also got the CE certificate, smoothly got the title of High and New Tech Enterprises. And has more than ten own intellectual property rights and patent technology. We have own import and export right. Our products exported to Russia, South Asia, South east Asia, Middle East, South America, Africa, Australia, Eastern Europe etc.