Mine rescue refers to the management of mine emergency rescue, mine rescue, miners self-rescue, mutual rescue and on-site first aid. The mine ambulance is a special vehicle that performs this function. The Iveco mine ambulance is the representative of the industry. The following is a brief introduction.

The technical parameters of NV5048XJH3 Iveco mine ambulance are as follows: Overall dimensions: 6080×2000×2740, total mass 4280kg, trimming mass 3150kg. The body of the car is a red color strip. The words on both sides of the body are "mining rescue", and the words before and after the body are "emergency rescue. There are 4 single seats on each side of the cab, and the driver has two single seats behind. Install foldable seats, place one breathing chamber on the left side of the back of the vehicle. There are instrument fixing straps and stoppers in the cabinet. The inside of the cabinet is a soft carpet, and the rear of the cabinet is placed on the right side of the vehicle. In one cabinet, the instrument has a fixed strap and a baffle, the inside of the cabinet is a soft carpet, the top position is a platform, the yellow mine rescue lights are installed on the platform, and two square bursts are installed on the glass on both sides of the rear door. Flashing light, frosted film on the rear left and right side windows and rear opening windows, rear double door open at the back of the car, and a widened and strengthened rear lift pedal at the rear entrance.NJ5056XJHNS Iveco mine ambulance, size 7233 ×2000×2955 , Total mass: 5000kg, Cured mass: 3750kg, Rated passenger (including driver) (person) 10-17, Front suspension/rear suspension (mm) 1000/1953. Characteristics of this vehicle: The body of the vehicle is red color strip. 2, the words on both sides of the car body are "mining ambulance" and the words before and after the car body are "emergency “Rescue”; 3. Place one breathing apparatus on the left side of the back of the vehicle. There are instrument fixing straps and baffles in the cabinet. The inside of the cabinet is a soft carpet. 4. Place the breathing cabinet on the right side of the back of the vehicle. Only in the cabinet there are instrument fixing straps and stopbands, and the inside of the cabinet is a soft carpet edge; 5. The position of the vehicle roof is made on a platform and the yellow mine rescue warning light is installed on the platform, and an alarm device is installed at the proper position of the instrument. Two square type strobe lights are installed on the glass on both sides of the rear door of the car, and a switch is installed at the proper position of the meter; 7. The rear left and right side windows and the rear door window are affixed with frosting film; 8. The rear door of the car is double-opened; 9, the rear car at the rear of the car to widen the strengthening of the pedal; 12, after the two sides of the single row of seats to make a cabinet; 10, the left side of the body to produce a skirt sideboard; 11, built-in small refrigerator 12 There are 13 seats.

The overall design of the Iveco Mine Rescue Vehicle is basically the same, except that there is a difference between the number of people in the car and the internal structure of the car. Mine rescue vehicles are necessary for social development and have broad market development prospects. When we choose to buy, we still have to choose a big brand, which guarantees security and after-sales service.

High Precision Mould Manufacturing Suitable for Precision Injection Molding,Process:

1. Material preparation: different mold materials required for different products are also different, according to the characteristics of the product to choose the right mold material.

2. Roughing: After selecting the material, the milling machine is used to perform preliminary processing on the plane and side surfaces.

3. Fine processing: It is necessary to use a grinder to machine the plane and square corners.

4. Dashing: Place the mold plate that has been ground and has been machined to a right angle after being finely processed and placed on the scribe table. Make a drawing according to the mold, scribing with a ruled height ruler, and finally make a dotted line on the mold plate. Drilling, tapping.

5. Heat treatment: heat treatment of the next template and module to improve the hardness of the plate after high temperature quenching, tempering, quenching, annealing, in the further finishing, the plate grinding plane and playing right angles, and then wire cutting.

6. Assemble the trial mold: select the mold frame or supporting guide column and guide sleeve to complete the mold assembly, and install the assembled mold on the press machine to debug stamping, and finally measure the outrush to confirm whether it meets the requirements of the product. The entire stamping process.

High-precision is a high technology in the field of stamping. When all kinds of electromechanical and home appliance manufacturing companies, such as their products reach the moderate economic production scale for mass production, the fine application of fine scouring technology can achieve good technical and occupational safety. High-speed precision stamping technology involves many fields such as machinery, electronics, materials, optics, computers, precision detection, information networks, and management technologies. It is a multidisciplinary system engineering.

NOTE: All products are photographed in factories

           just  use as technology sample

High Precision Mould Manufacturing

High Precision Mould Manufacturing,Plastic Injection Moulding,Precision Injection Molding,Precision Mold Parts

Ruizhun Precision Metal Co., Ltd. , https://www.rzjmdiecasting.com