Nowadays people have higher and higher requirements for air quality. Of course, if there is no good air when driving, it will also affect the driver's mood. The following Xiaobian teaches us two techniques to keep indoor air clean in bulk feed vehicles. Hope to help the driver's friends.

1. Correctly open the internal/external circulation of the feed carrier For the driver of the feed carrier, the best way to keep the air in the vehicle is to use the internal/external circulation correctly. The external circulation state is the use of a fan to draw the air outside the vehicle into the vehicle, because the outside of the vehicle and the air passage in the vehicle are in circulation. The wind blown by the fan comes from outside the vehicle. Even if the fan is not turned on, there is still airflow in the vehicle during travel. Inside the car, replenish the fresh air in the car. The internal circulation state is to close the air flow channel inside and outside the vehicle. There is no air circulation when the fan is not opened. The air flow that is drawn in when the air blower is turned on also only comes from inside the vehicle, and the air circulation inside the vehicle is formed. The internal circulation is mainly to effectively prevent external dust and harmful gases from entering the vehicle in a timely and effective manner. For example, when exhausted by smoke, dust, odors, or when the vehicle is densely and compactly driven, it blocks the harmful exhaust gas discharged by the preceding vehicle. Another function is insulation.

2, replace the bulk feed transport air filter

If you frequently go through dusty and rough roads in the near future, be aware that there may have accumulated a lot of dust in the air-conditioning radiators and pipes of your vehicles. If you do not clear them in time, it will be a harm to human health. Bulk feed truck air conditioner filters can effectively reduce pollutants entering the feed truck through the heating, ventilation, and air-conditioning systems, and prevent inhalation of harmful pollutants. It consists of a filter element and a housing. Its main requirement is high filtration efficiency and low flow resistance. It should be noted that the air conditioning piping and the air filter must be washed. The method of self-cleaning is to remove the filter element from the air cleaner, remove the dust from it by means of a beat or rake, or use a blower to blow off the dirt. If the filter element is found to be too dirty, then It will be replaced. To clean the air-conditioning duct dust, you can directly inject special cleaning agent into the air-conditioning inlet, and then open the air-conditioning loop, you can remove the dust in the pipeline.

In addition, many car owners like to smoke in the car, where the owner is advised not to smoke. Smoking is bad for air quality and harmful to health. Moreover, in the new traffic regulations, smoking is also not allowed.

The background and signification of research this program

As plastic has been used for all other industry widely, they are playing an important role in the development of our economy, but plastic did not easy to broken after being used and it becomes a big pollution for our environment .Therefore it is urgent to process those waste material without pollution.

In addition ,as the fastest development of world economy ,the shortage of petroleum will be urgent more and more .even the expert had stated that it will have no petroleum recover in earth after 15 years later, so searching the new resource becomes an issue which is concerned by all the countries of the world.  

so it have great meaning of settle this program ,which can recycled waste material like plastic into resources without any pollution.

1.Working process Of waste plastic Pyrolysis Plant:

First, the raw materials are put into the reactor, and then seal the feeding in door, later start the machine and the reactor will be rotating and heated by coal, natural gas, wood or electricity. When the temperature reaches the degree of 250 to 280, we will get the crude oil, the oil steam will be continuous produced until the temperature reaches 350-460 C; oil steam will flow through oil gas separator, light component will enter the condensers and meanwhile the heavy oil will be discharged automatically into in heavy oil tank. The liquefied part will be condensed as crude oil, and the part which cannot be liquefied will be transferred by the water seal back to the burning chamber to be reused as heating material.

2. Model of waste plastic Pyrolysis plant:

3. Plastic Oil output reference: 20%~75%

4. Installation: We will be in charge of arranging our engineer to go to your place to guide the installation and train your workers how to operate the waste plastic pyrolysis plant,and buyer will be in charge of the food, accommodation and round air tickets. 

 5. Land requirement: 300sq meters(10m*30m)

 6. Exporting Experience:

Waste Plastic Pyrolysis Plant

Waste Plastic Pyrolysis Plant,Full Automatic Waste Plastic Pyrolysis Plant,Oil Distillation Plant,Rubber Refining To Oil Plant

Shangqiu Sihai Energy Technology Co., Ltd , https://www.sihaienergy.com