The first batch of air source heat pump grain drying project was successfully installed and debugged by Jiangsu Jiangyan

On March 26th, a comprehensive high-tech facility was welcomed by the Tangji Tang Service Center in Jiangyan District, Taizhou City. As the first batch of air source heat pump grain drying projects in the area, the installation and commissioning was successfully completed. At the end of this month, the first batch of grain drying tests will be conducted to promote the application of electrical energy replacement in agricultural production and bring benefits to the people.
This set of drying technology uses air source heat pump units instead of coal-fired (fuel) hot blast stoves to provide heat for the grain drying tower. It not only achieves zero emissions of pollutants, but also saves more than 50% of the fuel and coal-fired drying energy, and promotes enterprises. Cost-saving income and green development.

In order to actively promote air-source heat pump grain dryers, in February this year, the marketing department of Jiangyan Power Supply Company took the initiative to contact the heat pump manufacturers to carry out the docking with the Jiangyan grain drying enterprises, and determined the first batch of Jiangyan District Tangjia Tang Weimin Comprehensive Service Co., Ltd. Demonstration point. The original six 12-ton coal drying dryers in the cooperative had dried more than 4,000 tons of grain last year. After optimizing the program, three new 16-ton grain dryers will be added to the service agency, each equipped with an air source heat pump with a power of 36 KW/set. According to calculations, the cost of the traditional dryer is only half that of the original after the new equipment was put into operation.

From March 12th to 16th, the staff of the marketing department of Jiangyan Power Supply Company went to the on-site field measurement with the dryer manufacturer and the heat pump manufacturer to determine the plan and coordinate the installation of the equipment. From March 22 to 25, drying equipment and air source heat pump entered the site on time and were installed in time. From the 26th to the 29th, the technicians started the connection and debugging of the equipment to ensure the smooth testing at the end of the month.

"The new air source heat pump drying equipment can not simply calculate the economic account, but also be good at calculating the environmental protection account, and each of us must do our part for the improvement of the atmospheric environment." Qian Cunming, head of Tangjia Tang Tangmin Comprehensive Service Agency Introduction, the new equipment is easy to operate, does not require personnel to abide by, saving manpower costs.

“Energy substitution is an effective measure to promote atmospheric management and environmental protection. As a category of alternative technologies, heat pump technology has broad application prospects.” Li Honglin, marketing staff of Jiangyan Power Supply Company, said that most of the existing grain dryers in Jiangyan District The use of coal, diesel, straw, etc. as fuel, high energy consumption, pollution, and the need for alternative transformation is imminent.

The province is advancing the “two reductions, six governance, and three upgrades” special environmental protection initiatives. Increasing energy substitution and optimizing energy consumption structure are very important measures. According to the deployment of the Jiangsu Provincial Electric Power Company of the State Grid, Jiangyan Power Supply Company provided assistance to all units and individuals of the new air source heat pump grain drying equipment in the distribution facility construction and power supply services.

10-22AWG Heat Shrink Butt Connectors Wire Insulated electrical Crimp Terminal

Product Introduction:

10-22AWG Heat Shrink Butt Connectors Wire Insulated electrical Crimp Terminal is made of polyolefin compounded with hot melt adhesive, Heat Shrink Wire Connector is has excellent insulation protection, waterproof and anti-corrosion performance. 

Insulated Heat Shrink Butt Connectors Wire Electrical Crimp the middle copper tube is high pure purple copper tube with superior conductivity. Splice Connector Heat Shrink Crimp Connector Wire Terminals Butt Connector, it has the advantage of good durablity, easy operation and low installation cost compared with conventional connector.

Product Application:

a) Generally applied to electric wire, wire harness, cables and electric connector for protection.


b) Applied to rogh environment for strengthen the fixed and anti-shock function.


 Product Feature:

a) Shrink ratio is 3/1

b) Color: Red, Blue, Yellow

c) PA hot melt adhesive has superior waterproof performance.

d) Extension performance is superior, resistance to mechanical damage.

e) Good electrical conductivity.

f) High elasticity tube is not easy to deformation.


Operating indicators:

Initial temperature: 80 degree Celsius

Min. Shrink temp.: 130 degree Celsius

Working temperature: 55~125 degree Celsius

Up to standard: Approvals

 According with UL224, ROHS


Product Pictures:

200PCS Insulated Solder Seal Wire Terminal Heat Shrink Butt Spade Connectors Kit

Heat shrink wire connector butt connector splice terminal

Product Specification:

Insulated Heat Shrink Butt Connectors Wire Electrical Crimp Terminals 16-14AWG Kit

Electrical Terminals Waterproof Seal Assorted Wire Crimp Heat Shrink Butt Connectors Kit



Wire Connectors

Ring terminals,Fork terminas,Butt-connectors with shrinking tube insulation,Female disconnects,solder-connectors,Assortment box

KEYUACE Materials Co., Ltd. , https://www.insulationtubing.com