A Special Survey on the Transformation and Development of Coal Industry in Gushan County, Shanxi Province

On April 10, Yuan Guanghui, secretary of the county party committee of Qinshui County, went deep into some coal enterprises in Duanshi Town and Hudi Township and conducted special investigations on the release of advanced production capacity and the promotion of the transformation and development of the coal industry. Zhang Shuiwei, deputy governor of Qinshui County, participated in the survey.

In Yanhe Energy's Duanshi Colliery, the original Guanghui had a detailed understanding of the state-level standard mine construction, the up and down well management of the miners, and the process flow of the coal preparation plant. He stressed that we must always tighten this string of safety production, comprehensively strengthen the standardization of production safety, strengthen our safety base, and ensure safe production. It is necessary to continuously emancipate the mind, change the concept of development, rely on institutional innovation and technological renewal, optimize the management of production processes, improve the quality and efficiency of development, and create a safe, productive, and efficient modern mine.

In the Hudi coal mine of the Shanxi Coal Group, the original Guanghui went deep into the integrated control room and gas power plants to learn about safety production management, production capacity planning, comprehensive utilization of gas, and gas use by rural residents. He stressed that we must increase investment in production safety, strengthen safety skills training, strictly implement the safety production system, and make every link of safety production more rigorous. It is necessary to strengthen the management of gas, develop and expand the project of comprehensive utilization of gas, and achieve both safety production and economic benefits. We must actively assume social responsibilities and ensure that the prices of gas in rural areas are reasonable and sufficient sources of gas are available to provide energy support for rural revitalization.

At the subsequent symposium, the coal companies put forward opinions and suggestions on how to release advanced production capacity and compete for the vanguard of the energy revolution, from policy measures, examination and approval services, and the relationship between enterprises and land.

After listening to everyone's speeches, Yuan Guanghui pointed out that the provincial party committee has proposed to build the development goal of the vanguard of the energy revolution. The municipal party committee has proposed to be the leader of the energy revolution revolution. As the main position of the energy revolution, Surabaya must thoroughly implement the decisions of the provincial party committee and the municipal party committee and deploy it in accordance with the arrangement of the county committee of the county committee of Jishui county and the economic work conference to focus on the transformation of the five industries and promote the establishment of a pioneering area for national clean energy bases. Promote the energy revolution and release advanced production capacity.

The original brilliance emphasized that we must stick to the safety red line. We must be alert and watchful, constantly carry out warning education, and reflect on various types of production safety accidents through reflection, so that employees of the company’s cadres and employees can make a long warning. To fall short of the fines, the safety laws and regulations and operating rules will fall into the smallest areas and fall to the very end of the production chain. It is necessary to perform responsibility and accountability, and strictly implement the responsibility system for safety production. In violation of laws and regulations and violations of operating procedures, the company shall strictly follow the law in accordance with regulations. Second, we must release advanced production capacity. Coal enterprises must scientifically organize production, orderly withdraw excess production capacity, accelerate the development of high-quality production capacity, and ensure that production reaches efficiency. The functional departments of the government must provide maximum convenience for enterprises under the premise of fulfilling their regulatory responsibilities, and ensure the normal production of production mines and the smooth construction of under construction mines. Third, we must extend the industrial chain. It is necessary to increase scientific research and technology introduction, and vigorously develop underground gas drainage comprehensive utilization, coal washing, clean coal, comprehensive utilization of coal gangue and coal and coal, and other industrial projects, relying on the industrial advantages and capital advantages of the group company and the parent company. Actively introduce downstream projects such as equipment manufacturing and production services. Fourth, we must provide quality services. Relevant departments should provide enterprises with efficient supervision services, examination and approval services, and law enforcement services, coordinate and solve problems encountered by enterprises in production in a timely manner, and fully protect the land, water, electricity, and labor of enterprises. Fifth, we must build a harmonious relationship. Local governments should regard service companies as an obligation to provide enterprises with a harmonious and peaceful production environment. Enterprises must vigorously support local development, provide financial and technical support for the poverty alleviation industry, transfer the life service projects to local areas, ensure the use of gas in the countryside, and help boost the rural development. It is necessary to strengthen cooperation between enterprises and regions, organize cooperation in spiritual civilization, and regularly organize party members and workers to carry out friendship activities, maintain cooperative relations, cultivate emotional foundations, and form a good atmosphere in the subtle changes.

Yuan Guanghui emphasized that the coal industry must play a leading role, continuously release advanced production capacity, turn the resource advantages, industrial advantages, and environmental advantages of Surabaya into the strong momentum of transformation and upgrading, and strive to be the leader of the energy revolution revolution in order to create high quality. Make greater contributions to the new situation of transformation and development.

Related News: Coal Research Transformation

Manganese Steel Plate Cutting Machine

Cutting mode: Laser cutting

Suit material: carbon steel, alloy steel, galvanized plate, stainless steel, copper plate, aluminium plate, steel tube, copper pipe, aluminium pipe etc. sheet matal.tube stock.

1.Product describe

Fast cutting spead, high working efficiency and high stability, it is a high-tech equipment that set one of fiber laser technology, CNC technology and high-tech equipment.

2. Product features

Imported with original packaging servo motor and reducer, bilateral drive, high operating speed and high precision.

Can remote operation, convenient and efficient, save labor.

Imported cutting head, optical glass, focusing is convenient and cutting perfect.

Fiber transmission, no need to adjusted the optical circuits, focal spot is more smaller.

Adopted auto lubrication system, auto dual-temperature control syatem, convenient and efficient.

High precision grinding guide rail, gear and rack, precision class up to ±0.02mm.

3.Product parameters

Type

TI-3015

Effective cutting width ( mm)

1500

Effective cutting Length ( mm)

3000

Circular tube diameter ( mm)

10-150

Square tube size ( mm)

10-150

Range of vertical stroke ( mm)

0-200

Input power

AC380V/50Hz;AC220V/50Hz

Cutting thickness ( mm)

0.3-15

Cutting speed ( mm)

21000 (1000W/stainless δ1mm)

Idle speed ( mm)

100000

Maximum Acceleration (G)

1.2

Position repeat accuracy ( mm)

±0.05

Laser power (w)

500-1500

Drive mode

Precision rack bilateral drive

Laser wavelength ( nm)

1080

Cooling mode

water-cooling

Environmental temperature

5-35℃

Cutting material

Carbon steel, stainless steel, alloy steel, copper, aluminum, galvanized sheet

4. Cutting samples

19

Cnc Laser Cutter,Manganese Steel Plasma Cutting Machine,Manganese Steel Gantry Cutting Machine,Manganese Steel Plate Cutting Machine

Shandong Buluoer Intelligent Technology Co., Ltd. , https://www.buluoercuttingmachine.com