JHJZ-2 type slagging tester is a special instrument developed according to the technical requirements stipulated by the national standard "Measurement method of coal slagging property" (GB1572-89). It is mainly used to determine the difficulty of slagging coal during gasification or combustion. Widely used in department laboratories coal, metallurgy, electric power, particularly in coal-fired units, boiler units, if any, can be measured in advance slagging resistance, in order to guide the scene matching coal, slagging.

working principle

The coal is made into a sample with a particle size of 3 -6 mm, placed in the gasification chamber of the instrument, ignited with charcoal of the same particle size, and gasified or burned under a certain blast strength, after the sample is burned out. The blast is stopped. After cooling, the carbon residue is taken out and weighed. After passing through a vibrating screen of 6 mm sieve hole, the percentage of the carbon residue larger than 6 mm is calculated as the slagging rate, thereby evaluating the slagging property of the coal.

Technical indicators

1. It should cooperate with blower: air volume ≥ 12m 3 /h wind pressure ≥ 1000mmHg;
2, coal sample size: 3 -6mm
3, the amount of loading 400cm

Precautions and spare parts

1. The flue gas chamber, air chamber and exhaust pipe should be cleaned regularly.
2, pay attention to rust prevention when not in use frequently.
3. The gasification chamber is a wearing part, and the instrument does not have spare parts.

Quick Detach Pedals

• One piece light alloy body
• Easy detachable pedal for transport/storage
• Uses same QR system allowing easy interchange between clipless and platform
• Toe clip compatible (recommended)
• Anti-theft when going outside
• Sealed Bearings: The axle of the bike pedals 9/16 inches which is made of chromoly steel, with Lubricated sealed bearings Platform Pedals(high-quality bearings). Sealed bearing Bicycle Pedals protect spindles from water and dust which will cause noise and other problems, let you enjoy cycling in raining or climbing.
  Non-Slip surface:the bicycle pedals are made of aluminum alloy. Using new style of reverse installation anti-slip nail offers plenty of grip and stability.
  
  

Anti-theft CNC Pedal

Shenzhen Gineyea Technology Co., LTD. , https://www.gineyea.com