The application of mining drilling rigs can speed up the recovery of ore and promote the development of mining technology. The Chinese-made CTC-700 mining chiseling platform used in the field, with the YGZ-90 or YG-80 rail drilling machine , can be oriented to the fan-shaped hole or the upward parallel hole, the hole depth can reach 25~30m, the work in the shift The capacity is 150~200m, the labor intensity is greatly reduced, and the labor efficiency is greatly improved. The site also has dual-machine and three-machine rock drilling rigs, and the efficiency is multiplied.
Figure 1 shows the intention of the CTC-700 mining rock drilling rig.
Figure 1 Schematic diagram of CTC-700 mining rock drilling rig
1- rock drill ; 2-supporting drill, 3-torque cylinder; 4-rail seat; 5-propulsion wind motor;
6-bracket; 7-compensation mechanism; 8-upper axle frame; 9-positioning jack; 10-fan oscillating cylinder;
11-middle arm; 12-swing arm; 13-side pendulum cylinder; 14-landing cylinder; 15-pin;
16-lower pedestal and support; 17-front jack; 18-front wheel pair; 19-rear jack;
20-rear wheel pair; 21-walking wind motor; 22-oiler; 23-hydraulic console
The vehicle is a single-folding type, and the wind-driven wheel platform is used for deep-hole drilling rigs. When the vehicle is working, the front and rear hydraulic jacks are used to level the vehicle body, aiming at the hole position, and the compensation cylinder is started to make the top end against the top plate and start the rock drilling machine. And the operation of the certificate can work.
Electric Scooter Parts
Belong electric scooter and be the part of it.
Electric Scooter Parts,Electric Scooter Chopper,Electric Scooter Accessories,Electric Scooter Conversion Kit
Yongkang Mysail Technology Co., Ltd. , https://www.mysail-scooter.com