Points for daily maintenance of magnetic flap level gauge
1. When designing and installing the connecting channel, a pair of shut-off valves can be added between the magnetic flap level gauge and the mounting interface. This seems to add a little cost to the valve, but the effect is very large, which is convenient for future maintenance, cleaning and overhaul. It can also be safely and conveniently replaced when the level gauge fails.
Panasonic understands manufacturers` challenges in adapting to the demands of increasingly wider market segments. So Panasonic designed a common platform that incorporates jumper wire and radial solutions in both the high-density and high-speed arenas, and an expanded axial solution with built-in jumper wire flexibility.
Radial Insertion Machine,Universal Radial Insertion Machine,Panasonic Radial Insertion Machine,Panasonic Insertion Machine Shenzhen Keith Electronic Equipment Co., Ltd. , https://www.aismtks.com
2. The level gauge must be vertical during use. If it is inclined, it will cause the magnetic float element to rub against the inner wall of the measuring tube, and the wear of the component will affect the use effect and may cause measurement errors.
3. After each internal cleaning of the liquid level gauge, pay attention to slowly let the liquid in the measured container flow into the measuring tube. The excessively fast flow rate will impact the floating ball. If it is serious, the floating ball may be damaged, resulting in the inability to measure. The consequences of the liquid level.
4. Various situations may occur during the industrial production process. Because of the special working principle of the magnetic flap level gauge, special attention should be paid during production. Do not stack magnetically charged electrical appliances or raw materials near the liquid level gauge. It will directly lead to inaccurate measurement data, and will seriously damage the magnetic properties of the original internal components, making it impossible to use normally.
5. The operator should pay close attention to the occurrence of liquid leakage during daily use. The components of the liquid leakage part should be replaced in time to prevent the leakage of the medium to cause corrosion damage to the liquid level gauge.
6. When the measured medium has a precipitation phenomenon, it is necessary to periodically discharge and clean the magnetic flap liquid meter. Excessive deposits can cause errors in the measurement data and result in a shortened life of the level gauge.
7. When encountering a fault, do not handle it yourself without preparation. Be sure to repair it after understanding the cause. If you do not understand the situation, you can consult the manufacturer. Otherwise, damage to the level gauge component will not be worth the loss. .
8. When the remote transmission type magnetic flap level gauge is bundled, it must be noted that it is forbidden to use the iron material for bundling reinforcement. The result of this will make the liquid level gauge not work properly.