Summer rain, many owners believe that the rain on the surface of the vehicle after the rain was washed clean, eliminating the need to wash the car trouble. However, in fact, rain often contains acidic substances. If the vehicle is not washed for a long time after being wetted by rain, these acidic substances will erode the glossy film on the outer surface of the paint to make the paint become overshadowed.

The invisible bituminous dirt, dirt, dirt, etc., mixed in the rain, are also easily absorbed in the body paint. These dirt, after exposure to the sun, can give rise to oxides that will leave indelible scars on the paint surface over time. Therefore, vehicle cleaning after rain is more important than ever.

Always check the working status of the wiper

In the rainy weather, the wiper will be used for a large purpose, but the rubber blades of the wiper will tend to age, harden, and even crack after being used for a period of time. The raindrops are not clean and clear, leading to blurred vision in front, which often leads to some accidents.

When doing wiper maintenance, the owner can put the wiper switch in various speed positions to observe whether the wiper has vibration and abnormal sound during work, check whether the wiper maintains a certain speed at different speeds, observe the state of the wiper, And whether the wiper rod is uneven or missing. If one of these two types of failures occurs, it means that the wiper blade is damaged. At this point, the owner can slowly pull up the wiper, touch it with his fingers on the wiper blade, and inspect the rubber blades for damage. If the leaves age, harden or even crack, they should be replaced in time.

Dehumidification and sterilization are key

The high temperature and rainy weather make the air moist. If you do not regularly dehumidify, the confined space in the car will easily breed various germs, thus affecting the health of the occupants. Therefore, riders need to start dehumidification and sterilization immediately after the rain stops. When it is raining, opening the air conditioner cold air not only removes fog, but also has the function of dehumidification. Use a professional car interior cleaner and wipe with a dry cloth. If there is no detergent, wipe the key parts with a clean towel or paper towel in time to keep the inside clean.

The most convenient way for vehicles to dehumidify is to find some cool and ventilated areas. Open the doors so that the moisture in the car can be completely eliminated in time. Then remove the car's foot mat and seat cover, clean and dry. The rear trunk cleaning can not be ignored, first remove the items, use a vacuum cleaner to remove the dust, and then wipe the rear compartment with a clean cloth dampened with water or detergent, and then put the items back after the rear compartment is air-dried.

In addition, after the rain, the air-conditioner air outlet tends to have a mild smell. The air-conditioner's warm air can be maximized, and various air-discharge modes can be used in turn, and the air blows for about 15 minutes. When the air conditioner is working, the temperature of the air outlet reaches 40-50°C, and the hot and humid air inside can be evaporated to remove the mildew smell.

Waterjet Intensifier Spare Parts

Waterjet Check Valve Body 60k Intensifier Check Valve Assembly Water Jet Intensifier Pump Parts Flow Waterjet Cutter Parts Lp Screw
Waterjet High Pressure Cylinder Waterjet 60k Lp Cylinder Tie Rod Water Jet Nozzle Check Valve Replacements For Flow Waterjet Cutting 87 K Pump 60k Intensifier Check Valve Assembly Waterjet Check Valve Body Waterjet Cutting Machine For Marble Glass Waterjet Pump Parts Bleed Valve Assembly Waterjet Direct Drive PumpIntensifier 60ksi Part Pressure Cylindermanufacturers For Waterjet Cut Machine

Waterjet Check Valve Body 60k Intensifier Check Valve Assembly Water Jet Intensifier Pump Parts Flow Waterjet Cutter Parts Lp Screw

Foshan Hairan Machinery And equipment Co.,LTD , https://www.hairannozzle.com