Do these operations affect the life of the car? Professionals explain


Many owners often have doubts about some driving habits or car functions. They fear that improper operation will affect the service life of the car. They hope that they can get guidance and let cars spend more time with themselves. Chen Yong, a person in this city's auto repair industry, answered some of the questions that were of high concern.

Steering wheel killed affect the steering system?

At present, the power steering system configured on a vehicle can be roughly divided into a mechanical hydraulic power steering system, an electronic hydraulic power steering system, and an electric power steering system.

For the mechanical hydraulic power steering system and the electronic hydraulic power steering system, safety valves are provided, and there is no need to worry about the hydraulic pump being hurt by the steering wheel. In addition to the design of the safety valve, a limit device is also designed on the steering mechanism, that is, even if the steering wheel is killed, the damage to the steering system cannot be achieved.

The electric power steering system does not have a hydraulic pump as a component. Instead, it is an electric motor. The computer-controlled steering system is more sophisticated in terms of safety protection functions, and there is no need to worry about this problem.

Parking wheel does not damage the steering system?

When many novices are parked, they often cannot grasp the wheels to correct themselves. Sometimes the front wheels are locked and they are directly locked out. This is indeed a bad habit of parking, which will damage the steering system of the vehicle in the long run. When people drive, after turning the steering wheel, they feel that the steering wheel has a positive back force, because the steering lever is under stress. The parking steering wheel does not return to the correct position, and the wheel will always pull the internal pull rod, causing wear over time.

The steering wheel does not return to normal when it is parked. Apart from minor wear on the vehicle components, there is a potential hazard that when the car is started next time, if you step on the accelerator directly, you may encounter the next vehicle.

Automatic start-stop function damages the engine?

With the continuous improvement of car configuration, more and more models have been equipped with automatic start and stop functions. However, some owners have been skeptical of this function. They feel that starting and stopping the engine frequently will affect the service life of the engine.

Most of the wear of automotive engines comes from instantaneous wear during cold start, and the automatic start-stop function imposes restrictions on the engine's temperature and ambient temperature. This function will not work when the engine temperature does not reach the proper start-stop temperature. Only when the engine temperature reaches a certain value, the automatic start and stop function will work, then start the engine is called hot start. And the automatic start-stop time is often not very long. The engine oil that is attached to the inner surface of the engine block by the oil pump will not completely flow back, and the parts still retain a lot of engine oil. In the case of a warm start, there will be no impact on the engine.

At present, most automotive companies have done a full tolerance test when launching an automatic start-stop system. The number of switches used in related devices such as engine ignition switches and starters is also much lower than the theoretical life value. Therefore, the engine start-stop device will not damage the vehicle's engine.



      The purpose of the powder making is to process the wheat after the cleaning and water adjustment through the Automatic Flour Machine, to make the special powder suitable for different needs, special powder, fine powder, standard powder and so on, and separate the by-products at the same time. The most complex and most important section of wheat processing is the most complex and most complex process of wheat processing. The key to the process of pulverization is how to separate the endosperm from wheat skin and wheat embryos as completely as possible. Therefore, the first problem to be solved is how to achieve high quality flour after the flour mill is produced, and the rate of powder production is high, which is also the process of pulverizing. It is complex. With the development of society, special flour has become a trend, and the requirements for automatic flour mills are getting higher and higher.

Automatic flour machine


If you have any questions, please contact with us directly. Welcome you can visit our Factory.For inqury,Please send mail directly to us.

Automatic Flour Machine

Automatic Flour Machine,Automatic Flour Machine Equipment,Wheat Flour Grinding Machine,Automatic Grinding Machine

Shandong Hengyi kaifeng Machinery Co.,Ltd , https://www.xhykf.com