The centrifugal jig is a re-election new equipment developed and produced by the North Mine Institute. The traditional jig is difficult to select -74μm material, and in the powerful centrifugal force field of the centrifugal jig, even particles as fine as 10μm can enter the effective sorting state. It has the advantages of selected grain width, strong adaptability, small difference in separation efficiency, low production cost, no environmental pollution, small floor space and large processing capacity. It is also used to treat mud minerals, lean ore and old tailings. Excellent equipment. Application abroad in iron ore, coal mining, placer gold ore, tungsten ore, lead and zinc tailings, flotation tailings and other sulfide minerals have achieved a good indicator.
The centrifugal jig developed by the North Mine Institute has the following characteristics: 1 The separation body adopts the split structure and the rotation weight is light; 2 The concentrated pulsation mechanism generates the pulsating water flow through the outer diaphragm, balances the diaphragm pressure with the pre-stress; Ring protection screen, bed; 4 no room jigging; 5 special sealing structure to solve the water leakage under the screen.
The machine has obtained national patents. The technical parameters of the centrifugal jig are as follows:
Model LT-1 LT750
Screen inner diameter / mm 436 750
Screen size / mm 0.1, 0.3, 0.6 0.1, 0.3, 0.6
Screen speed / (r / min) 0 ~ 815 0 ~ 580
Centrifugal strength / times 0~150 0~133
Stroke / mm 0~10 0~5.6
Rush times / min-1 0~1800 0~1850
Rotating motor power / kW 7.5 55
Pulsating motor power / kW 5.5 7.5
Processing capacity / (t / h) 3 ~ 5 8 ~ 10
The centrifugal jig is suitable for sorting various minerals in fine-grained and coarse-grained grades; it is an ideal equipment for secondary development of old tailings.
Tailor Made Bushing Cover
SINOFUJI Bushing Cover is made of radiation cross-linked polyolefin or cross-linked EPDM rubber material.
SINOFUJI adopts new molding process for bushing cover in the purpose of providing the world with first-class products and services.
It is SINOFUJI's concern that the bushing cover made by traditional manufacturing process, had been presented that the appearance is almost irregular, the dimension consistency is poor, and the insulation performance is unsatisfied.
While SINOFUJI bushing cover with new molding process presents kinds of advantages:
• Superior performance of aging and electrical insulation.
• regular appearance and accurate consistency in dimensions.
• Could be easily met with personalized design with high production efficiency.
• High material utilization thus total cost is lower than that of traditional process.
• In the cater for requirements of all kinds of special and complex shape thus to expand application scope of this products.
• It is environment friendly cause the cutted raw materials in the manufacturing process can be recycled for production use.
Insulation Covering Box,Cable Joint Box,Heat Shrinkable Busbar Cover,Heat Insulation Cover
ShenZhen FUJI Electric Material Co., Ltd , https://www.sinofuji.com