First Quarter Fiscal 2019

Note: Starting with the first quarter of fiscal 2019, Autodesk reports its results under two new accounting standards. Revenue is now reported under Accounting Standard Codification (“ASC”) 606 and sales commissions are now reported under ASC 340-40. We did not recast historical information as we elected to use the modified retrospective transition method. These new standards did not result in a change in timing or amount of revenue recognized for the majority of our maintenance and subscription offerings. However, we are required to capitalize and amortize sales commissions under the new standards. ASC 606 and ASC 340-40 do not affect cash flows or subscriptions.

• Subscription plan ARR was $1.40 billion, an increase of 103 percent compared to the first quarter last year as reported, and 101 percent on a constant currency basis. Under the prior revenue accounting standard, ASC 605, subscription plan ARR was $1.43 billion, an increase of 106 percent compared to the first quarter last year.
• Total ARR was $2.13 billion, an increase of 22 percent compared to the first quarter last year as reported, and on a constant currency basis. Under ASC 605, total ARR was $2.17 billion, an increase of 25 percent compared to the first quarter last year.
• Subscription plan subscriptions increased 307,000 from the fourth quarter of fiscal 2018 to 2.57 million at the end of the first quarter of fiscal 2019. Subscription plan subscriptions benefited from 154,000 maintenance subscribers that converted to product subscription under the maintenance-to-subscription (M2S) program.
• Total subscriptions increased 101,000 from the fourth quarter of fiscal 2018 to 3.82 million at the end of the first quarter of fiscal 2019.
• Deferred revenue was $1.81 billion, flat compared to the first quarter last year. Unbilled deferred revenue at the end of the first quarter was $412 million. Total deferred revenue (deferred revenue plus unbilled deferred revenue) was $2.22 billion, an increase of approximately 21 percent compared to the first quarter last year. Under ASC 605, total deferred revenue was $2.28 billion, an increase of approximately 24 percent compared to the first quarter last year.
• Revenue was $560 million, an increase of 15 percent compared to the first quarter last year as reported, and on a constant currency basis. Under ASC 605, total revenue was $574 million, an increase of 18 percent compared to the first quarter last year.
• Billings were $411 million, a decrease of 18 percent compared to the first quarter last year driven primarily by the initial impact of the adoption of ASC 606. Under ASC 605, billings were $561 million, an increase of 12 percent compared to the first quarter last year.
• Total GAAP spend (cost of revenue plus operating expenses) was $615 million, an increase of 2 percent compared to the first quarter last year. Absent ASC 340-40, total GAAP spend was $602 million, a decrease of 1 percent compared to the first quarter last year.
• Total non-GAAP spend was $531 million, an increase of 1 percent compared to the first quarter last year. A reconciliation of GAAP to non-GAAP results is provided in the accompanying tables. Absent ASC 340-40, total non-GAAP spend was $518 million, a decrease of 1 percent compared to the first quarter last year.
• GAAP diluted net loss per share was $(0.38), compared to GAAP diluted net loss per share of $(0.59) in the first quarter last year. Under ASC 605 and absent ASC 340-40, total GAAP diluted net loss per share was $(0.27).
• Non-GAAP diluted earnings per share was $0.06, compared to non-GAAP diluted net loss per share of $(0.16) in the first quarter last year. Under ASC 605 and absent ASC 340-40, total non-GAAP diluted net income per share was $0.16.

For definitions, please view the Glossary of Terms later in this document.

"Our first quarter results are a good start to the new fiscal year and demonstrate Autodesk is firmly in the growth phase of our business model transition," said Andrew Anagnost, Autodesk president and CEO. "Once again, our focus on driving growth in ARR has yielded strong results, which we believe will accelerate as we move through the year. Our focus and investment on our customers’ experience continued to drive customers to migrate from maintenance to subscription during the quarter. We’ve now seen approximately half a million maintenance subscriptions convert to product subscriptions in less than a year and we expect that number to grow significantly in the coming quarters."

"Our growth in ARR was only part of the story during the first quarter, as we also delivered strong growth in billings, total deferred revenue, and ARPS," said Scott Herren, Autodesk CFO. "This quarter also marked another milestone in our business model transition with our return to non-GAAP profitability. Overall, we remain confident in achieving the targets we set for this year and the long-term targets laid out at our recent investor day."

First Quarter Operational Overview

Subscription plan ARR was $1.40 billion, an increase of 103 percent compared to the first quarter last year as reported, and 101 percent on a constant currency basis. Subscription plan ARR includes $273 million related to the maintenance-to-subscription program. Maintenance plan ARR was $725 million, a decrease of 31 percent compared to the first quarter last year as reported, and on a constant currency basis. Total ARR was $2.13 billion, an increase of 22 percent compared to the first quarter last year as reported, and on a constant currency basis.

Subscription plan subscriptions (product, EBA, and cloud) were 2.57 million, a net increase of 307,000 from the fourth quarter of fiscal 2018, led by new product subscriptions and 154,000 product subscriptions that migrated from maintenance plan subscriptions. Maintenance plan subscriptions were 1.24 million, a net decrease of 206,000 from the fourth quarter of fiscal 2018, which includes the 154,000 that migrated to product subscription. Total subscriptions were 3.82 million, a net increase of 101,000 from the fourth quarter of fiscal 2018.

Total recurring revenue in the first quarter was 95 percent of total revenue compared to 90 percent of total revenue in the first quarter last year.

Revenue in the Americas was $234 million, an increase of 11 percent compared to the first quarter last year. Revenue in EMEA was $221 million, an increase of 16 percent compared to the first quarter last year as reported, and on a constant currency basis. Revenue in APAC was $106 million, an increase of 23 percent compared to the first quarter last year as reported, and 22 percent on a constant currency basis.

Under ASC 605

• Subscription plan ARR was $1.43 billion, an increase of 106 percent compared to the first quarter last year.
• Maintenance plan ARR was $746 million, a decrease of 29 percent compared to the first quarter last year.
• Total ARR was $2.17 billion, an increase of 25 percent compared to the first quarter last year.
• Billings were $561 million, an increase of 12 percent compared to the first quarter last year.
• Total revenue was $574 million, an increase of 18 percent compared to the first quarter last year as reported, and on a constant currency basis.
• Revenue in the Americas was $238 million, an increase of 13 percent compared to the first quarter last year.
• Revenue in EMEA was $229 million, an increase of 21 percent compared to the first quarter last year, and 20 percent a constant currency basis.
• Revenue in APAC was $107 million, an increase of 25 percent compared to the first quarter last year, and 24 percent on a constant currency basis.

Business Outlook

The following are forward-looking statements based on current expectations and assumptions, and involve risks and uncertainties some of which are set forth below under “Safe Harbor Statement.” Autodesk’s business outlook for the second quarter and full year fiscal 2019 assumes, among other things, a continuation of the current economic environment and foreign exchange currency rate environment. A reconciliation between the fiscal 2019 GAAP and non-GAAP estimates is provided below or in the tables following this press release.

Starting the first quarter of fiscal 2019, Autodesk reports its results under two new accounting standards. Revenue is now reported under Accounting Standard Codification (“ASC”) 606 and sales commissions are now reported under ASC 340-40. We did not recast historical information as we elected to use the modified retrospective transition method. These new standards did not result in a change in timing or amount of revenue recognized for the majority of our maintenance and subscription offerings. However, we are required to capitalize and amortize sales commissions under the new standards. ASC 606 and ASC 340-40 do not affect cash flows or subscriptions.

 

 

The second quarter and full year fiscal 2019 outlook assume a projected annual effective tax rate of (68) percent and 19 percent for GAAP and non-GAAP results, respectively. Assumptions for the annual effective tax rate are regularly evaluated and may change based on the projected geographic mix of earnings. At this stage of the business model transition, small shifts in geographic profitability significantly impact the annual effective tax rate.

Earnings Conference Call and Webcast

Autodesk will host its second quarter conference call today at 5:00 p.m. ET. The live broadcast can be accessed at http://www.autodesk.com/investor. Supplemental financial information and prepared remarks for the conference call will be posted to the investor relations section of Autodesk’s website simultaneously with this press release.

A replay of the broadcast will be available at 7:00 p.m. ET at http://www.autodesk.com/investor. This replay will be maintained on Autodesk’s website for at least 12 months.

Glossary of Terms

Annualized Recurring Revenue (ARR): Represents the annualized value of our average monthly recurring revenue for the preceding three months. “Maintenance plan ARR” captures ARR relating to traditional maintenance attached to perpetual licenses. “Subscription plan ARR” captures ARR relating to subscription offerings. Refer to the definition of recurring revenue below for more details on what is included within ARR. Recurring revenue acquired with the acquisition of a business is captured when total subscriptions are captured in our systems and may cause variability in the comparison of this calculation.

ARR is currently one of our key performance metrics to assess the health and trajectory of our business. ARR should be viewed independently of revenue and deferred revenue as ARR is a performance metric and is not intended to be combined with any of these items.

Annualized Revenue Per Subscription (ARPS): Is calculated by dividing our annualized recurring revenue by the total number of subscriptions.

Billings: Total revenue plus the net change in deferred revenue from the beginning to the end of the period.

Cloud Service Offerings: Represents individual term-based offerings deployed through web browser technologies or in a hybrid software and cloud configuration. Cloud service offerings that are bundled with other product offerings are not captured as a separate cloud service offering.

Constant Currency (CC) Growth Rates: We attempt to represent the changes in the underlying business operations by eliminating fluctuations caused by changes in foreign currency exchange rates as well as eliminating hedge gains or losses recorded within the current and comparative periods. We calculate constant currency growth rates by (i) applying the applicable prior period exchange rates to current period results and (ii) excluding any gains or losses from foreign currency hedge contracts that are reported in the current and comparative periods.

Enterprise Business Agreements (EBAs): These represent programs providing enterprise customers with token-based access or a fixed maximum number of seats to a broad pool of Autodesk products over a defined contract term.

Free cash flow: Cash flow from operating activities minus capital expenditures.

Maintenance Plan: Our maintenance plans provide our customers with a cost effective and predictable budgetary option to obtain the productivity benefits of our new releases and enhancements when and if released during the term of their contracts. Under our maintenance plans, customers are eligible to receive unspecified upgrades when and if available, and technical support. We recognize maintenance revenue over the term of the agreements, generally between one and three years.

Other Revenue: Consists of revenue from consulting, training and other services, and is recognized over time as the services are performed. Other revenue also includes software license revenue from the sale of our discontinued perpetual licenses.

Product Subscription: Provide customers the most flexible, cost-effective way to access and manage 3D design, engineering, and entertainment software tools. Our product subscriptions currently represent a hybrid of desktop and SaaS functionality, which provides a device-independent, collaborative design workflow for designers and their stakeholders.

Recurring Revenue: Consists of the revenue for the period from our traditional maintenance plans and revenue from our subscription plan offerings. It excludes subscription revenue related to consumer product offerings, select Creative Finishing product offerings, education offerings, and third party products. Recurring revenue acquired with the acquisition of a business is captured when total subscriptions are captured in our systems and may cause variability in the comparison of this calculation.

Subscription Plan: Comprises our term-based product subscriptions, cloud service offerings, and enterprise business agreements (EBAs). Subscriptions represent a combined hybrid offering of desktop software and cloud functionality which provides a device-independent, collaborative design workflow for designers and their stakeholders. With subscription, customers can use our software anytime, anywhere, and get access to the latest updates to previous versions.

Subscription Revenue: Includes subscription fees from product subscriptions, cloud service offerings, and enterprise business agreements (EBAs).

Total Deferred Revenue: Is calculated by adding together total short term, long term, and unbilled deferred revenue.

Total Subscriptions: Consists of subscriptions from our maintenance plans and subscription plan offerings that are active and paid as of the fiscal year end date. For certain cloud service offerings and enterprise business agreements (EBAs), subscriptions represent the monthly average activity reported within the last three months of the quarter end date. Total subscriptions do not include education offerings, consumer product offerings, select Creative Finishing product offerings, Autodesk Buzzsaw, Autodesk Constructware, and third party products. Subscriptions acquired with the acquisition of a business are captured once the data conforms to our subscription count methodology and when added, may cause variability in the comparison of this calculation.

Unbilled deferred revenue: Unbilled deferred revenue represents contractually stated or committed orders under early renewal and multi-year billing plans for subscription, services, license and maintenance for which the associated deferred revenue has not been recognized. Under ASC 606, unbilled deferred revenue is not included as a receivable or deferred revenue on our Consolidated Balance Sheet.

Safe Harbor Statement

This press release contains forward-looking statements that involve risks and uncertainties, including statements in the paragraphs under “Business Outlook” above, statements regarding ARR growth acceleration and maintenance to subscription conversions, other statements about our short-term and long-term targets, statements regarding the impacts and results of our business model transition, expectations regarding the transition of product offerings to subscription and acceptance by our customers and partners of subscriptions, expectations for billings, revenue, subscriptions, spend, EPS and ARR, statements about the impact of ASC 606, and other statements regarding our strategies, market and product positions, performance and results. There are a significant number of factors that could cause actual results to differ materially from statements made in this press release, including: failure to achieve our revenue and profitability objectives; failure to successfully manage transitions to new business models and markets; failure to maintain cost reductions or otherwise control our expenses; the success of our restructuring activities; difficulty in predicting revenue from new businesses and the potential impact on our financial results from changes in our business models; general market, political, economic, and business conditions; any imposition of new tariffs or trade barriers; the impact of non-cash charges on our financial results; fluctuation in foreign currency exchange rates; the success of our foreign currency hedging program; our performance in particular geographies, including emerging economies; the ability of governments around the world to meet their financial and debt obligations, and finance infrastructure projects; weak or negative growth in the industries we serve; slowing momentum in subscription billings or revenues; difficulties encountered in integrating new or acquired businesses and technologies; the inability to identify and realize the anticipated benefits of acquisitions; the financial and business condition of our reseller and distribution channels; dependence on and the timing of large transactions; failure to achieve sufficient sell-through in our channels for new or existing products; pricing pressure; unexpected fluctuations in our annual effective tax rate; significant effects of tax legislation and judicial or administrative interpretation of tax regulations, including the Tax Cuts and Jobs Act; the timing and degree of expected investments in growth and efficiency opportunities; changes in the timing of product releases and retirements; and any unanticipated accounting charges. Our estimates as to tax rate and the impact of the Tax Cuts and Jobs Act on our business are based on current tax law, including current interpretations of the Tax Cuts and Jobs Act, and could be affected by changing interpretations of the Act, as well as additional legislation and guidance around the Act.

Further information on potential factors that could affect the financial results of Autodesk are included in Autodesk’s Annual Report on Form 10-K for the fiscal year ended January 31, 2018, which is on file with the U.S. Securities and Exchange Commission. Autodesk disclaims any obligation to update the forward-looking statements provided to reflect events that occur or circumstances that exist after the date on which they were made.

About Autodesk

Autodesk makes software for people who make things. If you’ve ever driven a high-performance car, admired a towering skyscraper, used a smartphone, or watched a great film, chances are you’ve experienced what millions of Autodesk customers are doing with our software. Autodesk gives you the power to make anything. For more information visit autodesk.com or follow @autodesk.

Autodesk, AutoCAD, AutoCAD LT, BIM 360 and Fusion 360 are registered trademarks of Autodesk, Inc., and/or its subsidiaries and/or affiliates in the USA and/or other countries. All other brand names, product names or trademarks belong to their respective holders. Autodesk reserves the right to alter product and service offerings, and specifications and pricing at any time without notice, and is not responsible for typographical or graphical errors that may appear in this document.

© 2018 Autodesk, Inc. All rights reserved.

Brush of laser cutter

Brush of laser cutter

Wuxi huaoulai automation equipment Co., Ltd , https://www.china-hol.com