Whole Core Fire Retardant PVC/Pvg Conveyor Belt Abrasion Resistant
September 11 03:03:46, 2025
BAODING HUAYUE RUBBER BELTS CO., LTD
Baoding Huayue Rubber Belts Co., Ltd is one of the top 10 conveyor belt manufacturers in China. With over 800 employees, the company has a registered capital of 200 million RMB and an annual production capacity of 30 million square meters.
MAIN PRODUCTS
- EP Conveyor Belt
- Nylon Conveyor Belt
- Canvas Conveyor Belt
- Steel Cord Conveyor Belt
- Sidewall Conveyor Belt
- Fire Retardant (PVC, PVG) Conveyor Belt
- Heat Resistant Conveyor Belt
- Cold Resistant Conveyor Belt
- Oil/Acid/Alkali Resistant Conveyor Belt
- Special Pattern (Chevron) Conveyor Belt
- Conveyor Idler/Roller
- Conveyor Frame/Bracket
- Head Pulley/Tail Pulley
GENERAL SPECIFICATION
- Layers: 1-10 ply
- Width: 400-2200mm
- Thickness: 3-30mm
STANDARDS
DIN22102, RMA, AS1333, AS1332, DIN22109, DIN14890, DIN22102, ISO22721, ISO3684, SANS1173, SANS1366, SANS971, JISK6322, BS3289, ISO14890
WHOLE CORE FLAME RESISTANT CONVEYER BELT (PVC/PVG TYPE)
This type of conveyor belt is divided into two categories: PVC and PVG.
- PVC type conveyor belts have PVC coating on both top and bottom layers, with a single-sided tape thickness ≥1.0mm and a slope angle <16°.
- PVG type conveyor belts have nitrile rubber and PVC on the upper and lower layers, featuring TPE properties. The single-sided tape thickness ranges from 1mm to 3mm, with a slope angle <20°.
Structure
Made from the whole core via dipping and plastifying in polyvinyl chloride (PVC) dipping agent or sulfuration. It is fire retardant, antistatic, shock resistant, abrasion resistant, and corrosion resistant.
Application
Suitable for underground well haulage in coal mines and the conveyance of materials in metallurgical and chemical industries.
Technical Data
PVC
Standard MT914-2008
Safety Coefficient 10 (Break Strength ×1/10)
Slope Angle <16°
PVG
Standard MT914-2008 BS3289 HG2805
Slope Angle <20°
Standard Type
Grade
Break Strength≥, N/mm
Elongation at Break %
Advising Min Dia. of Transmission Drum (mm)
Longitudinal
Horizontal
Longitudinal
Horizontal
PVC
PVG
680S
4
600
265
≥15%
≥18%
320
400
800S
5
800
280
400
500
1000S
6
1000
300
500
630
1250S
7
1250
350
500
750
1400S
8
1400
350
630
750
1600S
9
1600
400
1000
1000
1800S
10
1800
400
1000
1000
2000S
11
2000
400
1250
1250
2240S
12
2240
450
1250
1250
2500S
13
2500
450
1400
1400
STEEL CORD CONVEYER BELT
General Steel Cord Conveyer Belt
It uses new type steel cord as the tear-resistant element. It has high tension strength, small elongation, excellent troughability, and high flexibility, suitable for long-distance, large-volume, and high-speed material conveyance.
Tear Resistant Steel Cord Conveyor Belt
Reinforcing layers of steel cord, fabric, etc., are evenly laid perpendicular to the lengthways steel cable. It has excellent impact and tearing resistance performance.
Tear Resist Belt With Detector
Uses new type steel cord as the tear-resistant element. A phase shift sensor (coil) is built in between the core rubber and bottom cover of the steel cord conveyor belt at certain intervals. It gives out an alarm and stops automatically when a tear is detected or the belt runs abnormally and reaches the preset off speed.
Technical Data