Nowadays, more and more advertisements are advertised, and LED advertising vehicles are also following the pace of development. With the continuous improvement of customer demand, the display screen for LED advertising vehicles is also continuously innovating. The display of various types of LED advertising vehicles is also constantly emerging. Now LED advertising car display can be divided into outdoor display and indoor display, usually LED advertising vehicles are used outdoor LED display. In terms of distinguishing from the color aspect, there is a monochrome display screen and a full-color display screen. The rear-view frequency of the LED advertising vehicle is generally a monochrome display, and the side frequency is a full-color display of choice. Because the display of LED advertising vehicles is constantly innovating and researching and developing, it can now be divided into a surface-mounted display and a display of in-line display. What is the difference between the two types?

1, LED advertising vehicles using the surface display screen, in the mixed light and light distribution in terms of better results. Because its design structure is three-in-one, and the distance between the three chips is also relatively close, it can have the effect of mixing light in the same bracket bowl. It is not three separate oval-shaped LED. , so the mixing effect in blue, green and red is better than the in-line display.

2. LED advertising vehicles use surface-mount displays in the horizontal direction with a wide viewing angle of over one hundred and ten degrees and can also have a viewing angle of over one hundred degrees in the vertical direction. This high-quality perspective can be advantageous in the use of some venues.

3. The production methods used for the surface display screens of LED advertising vehicles are all fully automated. The design circuit of the surface-mount display module can be combined with the driver board and the light board. This will not only effectively improve its reliability, but also reduce costs.

4, LED advertising vehicles using the surface paste display is glue-free, those traditional display is to be able to achieve a moisture-proof waterproof effect, so it will use the way to glue, but when the colloidal glue in your long For a long time, it is inevitable that there will be aging and falling off.

Lifting Belt

About Polyester Slings for Lifting

Polyester is a synthetic (man made) material that is extremely light weight and when made into lifting slings makes a very little cost effective lifting sling. The material is soft to touch (hence soft slings) and therefore is less likely to cause damage to the goods when they are lifted and will not cause the type of injuries to the user associated with Wire Rope Sling, for example cuts caused by broken wires, manual handling or impact injuries. Synthetic polyester (fiber material) slings are much lighter weight than both wire rope or chain slings and therefore this type of lifting sling is much easier to handle.

It is include Webbing Sling 

Round Sling

Application

How to use slings

1. Never use slings with damages or defects.

2.Use slings with clear identifications.

3.Check working load Limit ,length and working position

4.Never use slings with knots.

5.Never use slings on sharp edges without correct protection .

6.Use the correct mode factor and check lifting angle.

7.Trapping the sling when lowering the load should be avoided.

8.The temperature should be between -40℃ and 100 ℃.             

9.Stitching should not be placed over hooks or others lifting devices.   

10. Sling should be stored in dry and clear conditions .Away from heat sources, direct sunlight and UV rays.

11.In case of chemical environment ,please check with the manufacturer.

12.Elongation rate <3% at working load and <10% at breaking load 

CAUTIONS

1. Do not exceed working load limit

2. Prevent shock-loading.

3. Where selecting a sling it is very important to consider the angles at which the sling will be used.

4. Slings are subject to cutting when lifting items with sharp edges. In this case always use wear sleeve

5. Do not use a damaged sling.

6. Never make knots in a sling.

7. Never drag a sling from underneath a load that is resting on it.

8. Chemical active environments can affect the strength

9. Always store slings in a cool dry and dark place when they are not in use for     prolonged periods.

10. Always read and understand the operating instruction before use.

Reliable Sling

Since 2007
Specializing in webbing slings, towing strap, Ratchet Tie Down.
Consecutive sales increasement of 10 years
Passed the ISO9001:2008 and international certificate as CE, GS and TUV etc.
Provide OEM and ODM service to overseas customer
Export to more than 40 countries, mostly in European countries, America, Africa, Middle-east.
Our mission is to create high-quality, high-end products, allowing customers to use more convenient, more secure, more assured.

Our Services

1.We treasure and try to understand all the different needs of our clients and seek to forge a long term professional relationship with them. The satisfaction of each and every customer is our main goal and motivation in conducting our business.

2.Our products are of high-quality standards and always come with the certificate of compliance by the manufacturers. There is the strict quality control for each of our products.

Lifting Belt

Lifting Belt,Lifting Belt Sling,Polyester Lifting Belt,Lifting Sling Belt

Hebei Liston Lifting Rigging Manufacturing Co., Ltd. , https://www.liftingriggingfactory.com