"Pioneer Drying" special granule drying machine for traditional Chinese medicine (Chinese medicine unilateral dedicated dryer) is welcomed by customers
The Chinese medicine formula granules are granules made from the single-taste Chinese herbal decoction pieces that are extracted and concentrated for use in clinical formulas of traditional Chinese medicine. Previously known as the single-flavored traditional Chinese medicine concentrate granules, the product name and the folk name also include the fried Chinese medicine decoction pieces, the new decoction pieces, the refined decoction pieces, the beverage decoction pieces, and the scientific Chinese medicine. Based on the traditional Chinese medicine decoction pieces as raw materials, a new formula drug with a unified specification, uniform dose, and uniform quality standard has been processed through the extraction, separation, concentration, drying, granulation, and packaging processes. Features and Usage I. Convenience 1. It can replace traditional decoction pieces for clinical syndrome differentiation of Chinese doctors; After many years of production practice, Pioneer Drying has independently developed a special centrifugal spray dryer for traditional Chinese medicine formula granules and a special low temperature continuous vacuum belt dryer for traditional Chinese medicine formula granules according to the development status of Chinese herbal extract drying technology and the unique drying process of Chinese herbal extracts. Special spray drying machine for traditional Chinese medicine formula granules (Chinese herbal medicine special spray drying machine) Equipment Overview: Chinese medicine formula particle special low temperature continuous vacuum belt dryer Equipment overview and working principle: Compared with traditional dryers: project Low temperature continuous vacuum belt dryer Freeze dryer Vacuum drying oven Spray dryer Drying temperature Low temperature, medium temperature Low temperature Medium temperature, high temperature high temperature Drying time 30-60 minutes 20-35 hours 10-20 hours 10-20 seconds Product solubility Excellent Excellent general it is good product quality Excellent Excellent general it is good Physical preservation it is good it is good general it is good Operating costs low high in high Equipment investment in high low in Application area wide general wide in Continuous production can Not allowed Not allowed can Ceramic nozzle holders Ceramic Laser Ring,White Ceramic Laser Ring,Black Ceramic Laser Ring Changzhou Edaweld Trading Company Limited , https://www.edaweld.com
Conceptually speaking, the so-called single-taste traditional Chinese medicine formula granules are pure Chinese medicine product series made from traditional Chinese medicine pieces compliant with concocted specifications as raw materials and extracted, concentrated, separated, dried, granulated and packaged by modern pharmaceutical technology. It guarantees all the characteristics of the original Chinese Herbal Pieces and can meet the needs of doctors for syndrome differentiation and treatment. With the addition and subtraction of the license, it has strong medicinal properties and high efficacy, but at the same time it has no need for decoction, direct blunt treatment, less dosage, rapid action, complete ingredients, and efficacy Accurate, safe and sanitary, easy to carry, easy to modulate and suitable for industrial production and many other advantages. Chinese herbal formula granules have developed rapidly in the United States, Europe, Australia, South Korea, Japan, Taiwan, Hong Kong and other countries and regions. South Korea, Japan, Taiwan, and Hong Kong also export a lot in addition to satisfying the region. The development of modernization of traditional Chinese medicine in our country has lagged behind, and the promotion of traditional Chinese medicine formula granules is extremely slow
Its active ingredients, taste, appointments, indications, and efficacy are exactly the same as those of traditional Chinese medicines. It preserves all the characteristics of traditional Chinese medicine decoction pieces, and it can ensure the traditional Chinese characteristics of Jun, Chen, Zuo, Zhi and syndrome differentiation, and flexible addition and subtraction. , Better than proprietary Chinese medicines, but also eliminates the patient's traditional decoction troubles, but also can be flexible single-flavored granules, health and effective.
2. It does not need to be decocted, and when it is used, warm boiled water is mixed with granules;
3, small doses of fine packaging, blunt concentration can be self-mediated, taking a small dose;
4. The unit drug is light in weight, small in size, convenient for storage and transportation;
5, composite aluminum foil packaging, carrying, easy to save;
6, safety and health, moisture and moisture, long shelf life;
7. The name of the drug is printed clearly and the formula is clean and sanitary, which will help strengthen the management of traditional Chinese medicine.
2. Safety 1. Raw materials are traditional Chinese medicine pieces processed through strict quality control and processed;
2, by modern pharmaceutical technology extraction, separation, concentration, drying, granulation, packaging;
3. The specifications are uniform and the standards are the same. The curative effect is exact and stable.
Third, effective 1, with traditional decoction pieces have the same effective ingredients, sexual taste, the efficacy of the indicia;
2. The effective content of unit quality is several times higher than that of traditional decoction pieces;
3, strong drug, high efficacy, rapid effect.
IV. Dosing Method Pour one dose (one dose) of each dose of the drug into the same cup. Incubate with a small amount of warm water for 1-2 minutes, then rinse with appropriate amount of boiling water, stir, and mix thoroughly. 3 minutes to be fully dissolved, divided into two doses, taking time according to the different effects of prescription, follow the doctor's advice before or after meals.
In recent years, the drying technology of extracts of traditional Chinese medicine in our country has progressed significantly. Advanced extract drying techniques and equipment have been widely used. However, research on drying process optimization and equipment improvement is still urgently needed. Pioneer Drying After many years of production practice, according to the development status of the traditional Chinese medicine extract drying technology and the unique drying process of traditional Chinese medicine extracts, we have independently developed a special centrifugal spray dryer for traditional Chinese medicine formula granules. The equipment uses a high-speed centrifugal atomizer to disperse the feed liquid into a mist, complete contact with hot air to complete instant drying, and form a continuous drying device for powder or granular products.
Features:
1. The air inlet device is equipped with sub-high efficiency filter, so that the air entering the air can reach 100,000 purification;
2. Air filters, dehumidifiers, heaters, etc. are all modularized to facilitate disassembly, maintenance, maintenance, and fresh air are dehumidified;
3. To prevent the stickiness of the material, the device is equipped with an air sweeping device at the cone to accelerate the flow of the material on the cone; it effectively eliminates sticky coking of the product and improves product quality and yield. The wall of the tower is equipped with a cold wind jacket device, which solves the sticking problem of traditional Chinese medicine extracts. At the same time, the wall temperature is relatively low, and the coking and deterioration of the materials will not occur.
4. The atomizer is specially designed for the characteristics of the extract, and the distance between the atomizer plate and the top of the drying tower is also increased to avoid material suction.
5, spray tower volume and configuration based on the properties of the property for adjustment, making it more practical;
6. The inlet air temperature is automatically controlled, and a special finished product cold air centralized feed system is set for discharging, and the dry product can be separated from the hot and humid air in the system in time to avoid the possibility that the finished product will generate moisture-return damp and agglomerate. This ensures that the color, smell and taste of the material are not destroyed;
7, the use of two-stage cyclone dust collection device or a cyclone dust + wet dust collector;
8, using CIP cleaning system, convenient cleaning equipment, in line with GMP requirements;
9, the control system uses PLC program control, program control system screen display. The entire operating system is easy to understand and easy to operate.
10. The entire drying system is designed and manufactured in accordance with GMP regulations;
Pioneer brand low-temperature continuous vacuum belt dryer is a continuous feeding, continuous discharging vacuum drying equipment. The raw material to be dried is sent to the dryer through a feed pump, and evenly distributed on the conveyor belt through the distributor, through the high vacuum to reduce the boiling point temperature of the material, the liquid raw material is directly sublimated into vapor, and the conveyor belt is on the heating plate. On the uniform operation, the heat source in the heating plate can be steam, hot water, heat transfer oil or electric heating. Through the operation of the conveyor belt, from the front of the evaporation, drying to the back of the cooling material, the temperature range according to the material characteristics from high to low Adjustable, equipped with a specific vacuum smashing device at the discharge end to achieve different particle size of the finished product, the powder after drying can be automatically packaged or follow-up process.
The birth of Pioneer brand low-temperature continuous vacuum belt dryer transforms the traditional static drying into vacuum dynamic drying. The traditional 8-20-hour dry-out product can be converted into 30-60 minutes product, achieving different material adjustments. The objective of drying temperature also solves the drying of special materials such as high sugar content, high viscosity, high solid content, easy adhesion, easy clumping, thermoplasticity, heat sensitivity, and solvent recovery that cannot be handled by spray drying.
Features:
1. Continuous feeding and continuous discharging under vacuum conditions;
2, a full set of process automation, pipeline, continuous;
3. Drying, smashing and granulation under vacuum;
4, the drying temperature can be adjusted according to the material process requirements (25 °C ~ 200 °C);
Dry powder was continuously dried from 5, 30 to 60 minutes, and the dry powder output rate was 99%;
6, online automatic cleaning, in line with GMP requirements.
7. The maximum number of workers is two, which greatly reduces the manpower cost;
8, can solve the high sugar content, high viscosity, high solid content, etc. not easy to dry a variety of liquid and slurry drying;
9, operating costs are 1/3 of the vacuum oven, spray drying, 1/6 freeze-dried;
10, heat-sensitive materials are invariant and do not contaminate bacteria; 
keramik3.jpg
Ceramic parts are a vital component of most CO2 machines cutting head when the nozzle holder and the sensor head is often made of ceramic to withstand large and rapid changes between different temperatures and is designed to act as an insulator for isolating the nozzle from the rest of the cutting head and thus create a magnetic field between the nozzle and sheet, this controls the Z axis and height adjustment to allow for uninterrupted height adjustments directly in production.
An uneven plate, in other words, no major obstacles during laser cutting.
Though ceramic is very much about Precitec, meaning if you have a Precitec cutting head and need a nozzle holder, chances are that it is a Precitec part. Even the leading machine manufacturers such as Trumpf and to some extent Bystronic, uses Precitec parts although they often appear to be their own.