Shuangyang Lighting After-sales Description: 4 suggestions for lamp maintenance
CONNECT rendering Raw Material Handling Equipment including the raw material hopper, silo, large bones or animals crusher, feature water squeez machine to remove the water which come from slaughterhouse, the feature belt conveyor which for feeding the raw material into digestor. The small capacity Rendering Plant is working with the raw material feeding conveyor to digest to realize the semi-automatic working process for feeding. The large capacity rendering plant need working with the raw matereial hopper, feeding pump system to form the fully automatic working which not only saving labors cost but also match the large working capacity.
Raw Material Handling Equipment Raw Material Handling Equipment, Raw Material Bin, Raw Material Silo Connect Group For Poultry Project , http://www.connectpoultry.com
[Lighting net] Home lighting does not get the cleaning and maintenance it deserves, and the high-end lamps will soon be dull. Luminaires need regular cleaning and maintenance to maintain the brightness of the lighting and extend the life of the lighting. The lampshade is dimly lit by dust, and if not treated in time, it reduces the brightness by about 30% on average every year. Therefore, it is especially important to clean the lampshade and the lamp or bulb regularly.
Therefore, the author specially interviewed Ms. Wang, Shuangyang Lighting Service Department, who provided us with 4 points of lamp maintenance advice:
First, after buying the lamp, don't be busy installing it. You should carefully look at the lamp's mark and read the installation and operation manual, and then install and use the lamp according to the instructions. Otherwise, danger may occur;
Secondly, replace the aging lamp with the light source parameters provided by the sign, and find that the two ends of the lamp are red, the lamp is black or there is a black shadow, and the lamp is not bright, the lamp should be replaced in time to prevent the occurrence of ballast. Unsafe phenomena such as burnout of the device;
Third, during cleaning and maintenance, care should be taken not to change the structure of the luminaire, and do not replace the parts of the luminaire casually. After the cleaning and maintenance is finished, the luminaire should be installed as it is, and the parts of the luminaire should not be missed or misplaced;
Fourth, the lamps should be strengthened during use to extend their service life. The lamp of the room should always be wiped with a dry cloth, and pay attention to prevent moisture intrusion, so as to avoid the phenomenon of rust damage or leakage short circuit for a long time; the lamp installed in the toilet and bathroom must be equipped with a moisture-proof lampshade, otherwise the service life will be greatly shortened; Lamps installed in the kitchen should pay special attention to anti-smoke, because the accumulation of grease stains affects the illumination of the lamp; the light-colored lampshade has good transparency, but it is easy to stick to the ash, so it should be diligently wiped to avoid affecting the penetration of light; If the luminaire is non-metallic, use a damp cloth to prevent dust from accumulating and hinder the lighting effect.
