Pay attention to the factors affecting the accuracy of the vacuum feeder
Advantages:
Grey,Yellow grid,Purple,Green,Light green,Black,Perforated Yellow grid,White,Blue,White grid,Sky Blue,Yellow,Orange,Red
Color curtain:0.8mmthickness.
Function:insect prevention
Auto Recovery High Speed Door, self-recovery high speed door, self-repair high speed door, high speed zipper door, zipper high speed door SHENZHEN HONGFA AUTOMATIC DOOR CO., LTD , https://www.hongfahsrs.com
Vacuum feeding machine is mainly used for conveying powder and granular materials, such as raw material powder, chemical powder, metal oxide powder, explosive powder; capsules, tablets, pills, small food particles, explosive particles, etc.; not suitable for conveying Too moist, sticky, heavy material.
This shows that it has a broad market in the pharmaceutical industry. Vacuum feeding machine also brings great convenience to industrial production. However, in order to make the vacuum feeding machine work better, there are many aspects that require everyone to pay attention because factors that will affect the accuracy of the vacuum loading machine. Still more.
First of all, the positioning speed of the vacuum feeder has a great influence on the accuracy. Because of the different speeds, the energy of the components that it must dissipate is also different. In the ordinary course of operation, a reasonable control speed is often required in order to reduce such positioning errors. For example, an appropriate deceleration is required to increase the buffering performance and efficiency of the buffer device.
Secondly, the precision of the vacuum feeder and the accuracy of the installation speed control have a great influence on the positioning accuracy. If these precisions are not good, positioning accuracy will inevitably be misaligned.
The change in the weight of the moving parts of the vacuum loader again has a great influence on the positioning accuracy. As the weight increases, the positioning accuracy decreases. We must minimize the importance of this moving part in the design, and we must also consider the impact of changes in our work.
Finally, the position control accuracy of the control system of the vacuum feeder, electro-hydraulic proportional control, and servo control has a great influence on the positioning accuracy. This is not only related to the accuracy and sensitivity of each control element, but also has no position feedback. Device related.
In order to accurately position the vacuum loader, it is necessary to pay attention to many aspects. When manufacturing the vacuum loader, it is necessary to pay attention to the accuracy of the control system. When manufacturing the feeder, it is necessary to accurately measure the various parts of the machine. Positioning. At the same time, it must also be timely repaired and mastered the three-step maintenance strategy of the vacuum feeder in order to better ensure the accuracy of the feeder.
The advantage of Self Reparing High Speed Doors are self-reparing,easy to clean,complete safe,energy saving and so on.
If the door curtain comes out of its guides(for example in the event of impact with a forklift),the system will reset the cutrain back intp the guide during the next opening cycle autimatically
Motor System:
Germany Famous Brand-SEW
Power Supply: 0.75kw, 1.5kw, 2.2kw
The incremental encoder mounted is attached to the end of the drum shaft.
Self-Repairing Door Curtain:
Made of reinforced PVC, with flexible weighted soft bottom edge.
The edge of curtain has continuous injection molded teeth that then move up and down in a self-lubricating polyethylene track attached to structural galvanized side frames.
PVC Curtain
Transparent curtain:1.2mm.