Dr3006 Brass Stop Cock Valve with Cast Iron Sheet Handwheel

Model NO.: DR3006
Standard: DIN, GB, ANSI, BSW, JIS
Trademark: D&R
Transport Package: Export Standard Package
Specification: 1/2"-2"
Origin: Zhejiang, China
HS Code: 8481804090
Model NO.: DR3006
Standard: DIN, GB, ANSI, BSW, JIS
Trademark: D&R
Transport Package: Export Standard Package
Specification: 1/2"-2"
Origin: Zhejiang, China
HS Code: 8481804090
Dr3006 Brass Stop Cock Valve with Cast Iron Sheet Handwheel
Dr3006 Brass Stop Cock Valve with Cast Iron Sheet Handwheel

Dr3006 Brass Stop Cock Valve with Cast Iron Sheet Handwheel
Dr3006 Brass Stop Cock Valve with Cast Iron Sheet Handwheel

Dr3006 Brass Stop Cock Valve with Cast Iron Sheet Handwheel
Dr3006 Brass Stop Cock Valve with Cast Iron Sheet Handwheel

Body material:Brass
Nominal pressure:2.0MPa
Medium:Water, non-corrosive liquid, saturated steam(≤0.6MPa)
Working Temperature:-10ºC≤t≤120ºC
Cylindrical pipe thread comply with ISO230,NPT,BSP

  Dr3006 Brass Stop Cock Valve with Cast Iron Sheet Handwheel
Dr3006 Brass Stop Cock Valve with Cast Iron Sheet Handwheel

Dr3006 Brass Stop Cock Valve with Cast Iron Sheet Handwheel
Dr3006 Brass Stop Cock Valve with Cast Iron Sheet Handwheel

Dr3006 Brass Stop Cock Valve with Cast Iron Sheet Handwheel
Dr3006 Brass Stop Cock Valve with Cast Iron Sheet Handwheel

Body material:Brass
Nominal pressure:2.0MPa
Medium:Water, non-corrosive liquid, saturated steam(≤0.6MPa)
Working Temperature:-10ºC≤t≤120ºC
Cylindrical pipe thread comply with ISO230,NPT,BSP

 

The Galvanzied Water tanks are used to provide storage of water for use in many applications, drinking water, irrigation agriculture, fire suppression , agricultural farming, both for plants and livestock, chemical manufacturing, food preparation as well as many other uses.


The Panel size : 1000x1000mm, 500x500mm, 1000x500mm 

Thickness :2mm, 3mm , 4mm, 5mm, 6mm


Use Q235A steel panel and press into 1220x1220mm, 1000x1000mm and 1000x500mm standard panel, make holes around Water Tank, through coated zinc surface treatment, and install on site. When installation, bolts and nuts collection and silicon sealing gaskets among panels.


The sectional panels shall be pressed to double flanges at the angles of 45 degree and 90 degree to the face of the plate on four sides.


All tanks are internally braced with angle stays to endure the rigidity of the tank when filled with the water .The top panel is supported by top panel support ,which shall be made of stainless steel grade 304 or 316 material according to requirement . 

Hot Dip Galvanzied Water Tank

Hot Dip Galvanzied Water Tank

Shandong Hiking International Commerce Group Co.,Ltd , https://www.constructionfrp.com