The tires of the road-cleaning vehicle are also the most important part of the whole car. Just after having a healthy leg, people can run very well and quickly. The tire is directly in contact with the ground, and the suspension of the road cleaning vehicle is also used to mitigate some of the impact received by the vehicle while driving, so as to better ensure that the road cleaning vehicle has a better Smooth ride and ride comfort. After experiencing a long period of wear and tear, vehicle tires must be replaced with new ones or disassembled. Of course, it is not just after the tires have been replaced. After the replacement, some relevant tests are required to ensure the safety of the road-cleaning vehicle in the future.

1. When the tires are dismantled and replaced, new tires need to be balanced. After a vehicle tire is mounted on a rim, it is generally not possible to have a 100% uniform weight distribution. In this case, a balancer should be used to test the balance of the rim of the tire under operational conditions. Those unbalanced points use counterweights for weighting so that the tires can run smoothly.

2. When replacing road tires with new tires, the valves need to be replaced. That's because the valve is a rubber product that is depleted, and it has some problems with the aging cycle. When replacing the new road-cleaning vehicle tires, although there appeared to be no problem with the valve at that time, in the new tire's life cycle, the valve will always be in a condition of aging, and it will also cause Some invisible security risks.

3. The road cleaning vehicle needs to perform a four-wheel alignment when replacing a new tire, and tests the tire pressure. The positioning of the rear wheels mainly includes the camber angle of the front wheel of the rear wheel. The front wheel alignment mainly includes the front wheel toe, the main pin caster, the front wheel camber, and the kingpin tilt. The rear wheel alignment of the vehicle and the front wheel alignment add up to be called wheel alignment. Also, it is what we often call four-wheel alignment. The main function of the wheel alignment is to make the road cleaning vehicle able to maintain a relatively stable steering and lightening as well as branch lines, and also reduce the wear of the red steering mechanism and the wheel during the running of the vehicle. (Text / Sun Ni)

Snoworld ice crusher machine is mainly designed for breaking Block Ice Machine into small fragments, which are used for seafood preservation. Ice Crusher Machine can crush block ice with a maximum size of 450*180*1200mm. Ice Crusher has several features.

1. Compact, energy-saving and high wear resistance.

2. Galvanized steel or stainless steel as material, hygiene and anti-corrosive.

3. Big feeding port, which is convenient for putting block ice and protective for the motor.

4. Fast crushing, for one ice block of 450*180*1200mm, the crushing time is about 10 minutes per piece.

Ice Crusher

Ice Crusher Machine,Ice Crusher,Electric Ice Crusher,Commercial Ice Crusher

Fujian Snowman Trade Co., Ltd. , https://www.sinoicemachine.com