Sand dryer market demand is full of stamina
Oil Coolers, Aluminum Plate Bar Water Cooler,Railway Locomotive Aluminum Radiator Wuxi Better Technology Co., Ltd , https://www.btheatexchanger.com
Sand dryer continuously strengthens its innovative R&D capabilities, improves the economic development of China's construction industry, makes indelible contributions to China's construction economy in a different era, and sells grain drying products from Xingbang Heavy Industry dryer manufacturers year after year. The increase in the number of dry machines shows that there is a great momentum of development.
Sand dryer can be used for sea sand, river sand, surface sand, quartz sand and other products, itself has a strong thermal recycling line, at the same time, the initial moisture of the material is higher than 75%. Environmental pollution-free without any combustion and emissions, is a sustainable development of environmentally friendly products. Sand drying equipment will not produce any harmful substances in the drying process, and there will not be smoke or open flame in the drying process. The temperature and humidity can be modulated according to the characteristics of the drying materials, and the degree of intelligence is high. The entire system operates without the flammability that may exist in conventional dryers. The drying process does not require special care. After the material is baked or the drying temperature is reached, the unit will automatically shut down to achieve energy-saving effect.
The material of the dryer is evenly spread on the welded mesh belt by an automatic batcher. The mesh belt generally uses a 12-60 mesh stainless steel mesh and is moved by a transmission device to move in the dryer. Its energy-saving capacity is more than 50% more than that of electric heating tubes, such as infrared microwaves. It is 40% more energy-efficient than burning oil, and 20% and 30% more energy-efficient than burning coal. In the drying process, the unit generates cold air, and the cold air can be directly discharged into the work shop. Room temperature. The dryer consists of several units. Each unit has its hot air circulated independently. Part of the exhaust air is discharged by a special dehumidifying fan. The exhaust gas is controlled by a regulating valve. The heat is sent from bottom to top or from top to bottom. The process of mass transfer takes away material moisture.
Aluminum radiators For Railway Locomotive, Aluminum, high vacuum-brazed, plate&bar heat exchangers which is Compact, Lightweight, High Efficient Heat Transfer.
The cooler is used to cool down oil/water/air in general using air through forced ventilation on machines that operate continuously in severe work conditions.
Air cooler, oil cooler, water cooler are mounted side by side with motor,fan and fan shroud.
