Model NO.: SFDP1-030-045-33
Ground Drainage and Irrigation Machinery Type: Pumping Irrigation
Certification: CE, CE, ISO9001:2008, RoHS
Condition: New
Application Field: Agriculture, Industry/Yacht/ RV
Product: Garden Pump
AMPS: 8.0A Max
Flow Rate: 11.6lpm/3.0gpm
Pressure: 45psi/3.1bar
Port Dimension: 1/2"-14 Mnpt
Diaphragm: Santoprene
Valve: EPDM/Viton
Protection: Thermal/Ignition Protection
Application: RV/Marine/Yachts/Boat/Caravan/Water System,Ect
Trademark: SEAFLO
Transport Package: Strong Carton/Poly Foam.
Specification: CE
Origin: Fujian, China
HS Code: 8413509090
High Flow Water Pump Agricultural Spray Rvs Solar Garden Pump
11.6LPM/3.0GPM 45PSI
Description
1. Run dry without damage (Run Dry Capability)
2. Quick-connect plug-in ports for easy installation (Hose Kit Included)
3. Self-priming
4. Gnition & Thermally Protected
Specifications
How a Diaphragm Pump Works:
The pump is driven by an AC or DC moto
In front of the motor is a valve assembly containing two to five valve pump chambers. Each valve chamberhas a diaphragm behind it in the lower pump housing. As the motor shaft turns, an internal cam positioned behind the diaphragms causes the diaphragms to be pushed forward, then back in a continuous sequence creating a suction. As this suction builds, fluid is pulled through the inlet, through the various valve chamber check valves to the outlet
The volume of flow is determined by several factors including: The number and size of the pump chambers, cam offset, operating pressure, fluid viscosity
| Motor Voltage |
12/24V DC |
| Type |
3 chamber diaphragm pump, self priming, capable of being run dry |
| Mode |
Demand or bypass |
| Certifications Option |
CE Approval |
| Liquid Temperature |
140°F (60°C) Max. |
| Priming Capabilities |
6 feet (1.8 m) |
| Max Pressure |
45psi (3.1bar) |
| Max Flow rate |
11.6lpm (3.0gpm) |
| Thermal Overload Protected |
Start working when temperature reach 90°C(+-10%) |
| Inlet/Outlet Ports |
10/13mm pyramid hose barb, 13mm angle hose barb, 1/2 FNPT thread filter for your choice. |
| Duty Cycle |
Intermittent (under different pressure the continuous working time will also be different) |
| Motor options |
2 pin connector |
| On/off switch |
| Model |
Switch |
GPM/LPM |
PSI/BAR |
Max Draw
(A) |
Valves |
Diaphragm |
Ports |
Voltage |
Wire
Connections |
| SFDP1-030-045-33 |
Demand |
3.0/11.6 |
45/3.1 |
8.0 |
EPDM |
Santoprene |
1/2"-14 MNPT |
12V |
2-Pin/Leads |
| SFDP2-030-045-33 |
Demand |
3.0/11.6 |
45/3.1 |
4.0 |
EPDM |
Santoprene |
1/2"-14 MNPT |
24V |
2-Pin/Leads |
| SFDP1-028-040-33 |
Demand |
2.8/10.0 |
45/3.1 |
8.0 |
EPDM |
Santoprene |
1/2"-14 MNPT |
12V |
2-Pin/Leads |
| SFDP2-028-040-33 |
Demand |
2.8/10.0 |
45/3.1 |
4.0 |
EPDM |
Santoprene |
1/2"-14 MNPT |
24V |
2-Pin/Leads
 |
Vertical Drilling
Vertical drilling machines are the most widely used in metalworking. ... The tool, such as a drill, countersink, or reamer, is fastened on a vertical spindle, and the work-piece is secured on the table of the machine. The axes of the tool and the hole to be drilled are aligned by moving the workpiece.
Vertical Drilling,Drill Vertical,Vertical Drill Press,Pillar Drill
Jiangsu Hoston Machine Tools Co., Ltd. , https://www.haostonmachinetools.com