Many people always like to throw litter at random. This has caused great inconvenience to workers. Fortunately, there are now garbage trucks that have brought some help to their work. When using the garbage truck, the owner has to consider its maintenance issues because only good maintenance and repair can lengthen its service life. Therefore, detailed understanding of how to maintain and maintain the garbage truck It is very necessary, for you to make the following introduction.

Firstly, the use of the engine for the chassis of the hanging garbage truck must be strictly followed in accordance with the formal methods, and it should be implemented according to the instructions.

Secondly, if it is to purchase new ones, when the garbage truck is used again, it must be given enough time, a sufficient number of kilometeres, to run in. In addition, when writing something, it will not step on the gas pedal. Unloading

Thirdly, when the cylinder is working for a certain period of time, it is necessary to completely replace the working oil. First, you need to open the fuel tank, then put it into the screw plug, then inject new oil from the above oil hole, and then start the engine. After two trials have been confirmed, the system will start again.

Fourth, the high-pressure fuel pipe in the car should be replaced regularly. The cycle is generally changed every two years. However, if the pipe is found to be damaged and inflated in the process of use, it should be replaced in a timely manner. Also need to frequently check the hydraulic system for oil leakage, and timely replacement and maintenance.

Fifth, when the car is working every day, it needs to be washed in a timely manner. The cleaning site includes the entire vehicle and the carriage. It is also necessary to check the amount of oil regularly and regularly apply grease to various parts. The surface of each guide rail must also be painted. For the working pressure of the gear oil half, it is necessary to check and adjust it regularly. It is also necessary to check the filter element in the oil filter to remove impurities and replacement.

After reading the above introduction, you should already know something about the maintenance knowledge of the hanging garbage truck . For the car, the owner must love it. This will not only extend the service life, but also provide safety when used.

5D Wheel Alignment With Tablet is stadard specification of 5D Wheel Alignment. This model is very simple. The user can operate the measurement and adjustment only with a tablet. The data transmit is by WiFi. So the mesurement results are very stable. With the development of technology, it is possible to control the whole process by the tablet with android system. Due to WIFI transmission, users can connect more devices  with android system, for example cell phone with android system.

Advantages of Sucvary 5D Wheel Alignment:

1.Without limitation of space,5D wheel alignment can be used on all kinds of lifts.

2. With 5 cameras, the reference plane is car body, so 5D wheel alignment can measure almost all kinds of vehicles, even if the vehicle is lifted.

3. 5D wheel alignment supports varied operation platforms, point to point transmission by WiFi can shied interference.

4. 5D wheel alignment is supported by powerful cloud service; 5D wheel alignment can connect to IPAD, cell phone, computer and the Internet, supporting remote operation and data upgrade.

5. Four targets are crash resistant and can be exchanged. Fix wheel claws without taking apart wheel hub cover.

6. 5D wheel alignment measurement range is wide, and it can also test wheel deviation besides all traditional parameters.

7. The optional one point wheel clamps can be installed within four seconds.

5D Wheel Alignment With Tablet

5D Wheel Alignment With Tablet,5D Wheel Alignment

Shenzhen Sucvary Tech Co., Ltd. , https://www.syalignment.com