Food Processing Metal Detector Machine with Customized OEM Service
Windstar 1996-2003
Taurus 1996-1989
FAIRMONT 1980-1983
GRANADA 1981-1982
LTD 1983-1986
MUSTANG 1985-2004
TAURUS 1986-1995
PROBE 89-92
ESCORT 91-96
ASPIRE 94-97
FESTIVA 88-93
PROBE 93-97
CONTOUR 95-00
ASPIRE 94-97
FESTIVA 88-93
ESCAPE 01-12
F-150 04-08
There are two main reasons; age changes the density of the insulating material so more noise and vibration can be transmitted into the vehicle and the bearing portion of the mount wears.
A simple rule of thumb is that if the struts or coil springs are being replaced because of age or wear, then also replace the mounts. A worn or damaged mount can cause a variety of symptoms so they should be inspected by a qualified technician. Disassembly of the entire strut & spring assembly is required to remove & replace the mount. Therefore replacing all worn components at the same time could save you from doing the work a second time.
Ford Strut Mounts, Ford Top Mount, Ford Shock Absorber Mounting Wenzhou Unite Auto Parts Co., Ltd , http://www.strut-mounts.com
Advanced technique of electrical & mechanism designs is adopted for EJH series automatic conveying metal detector which have reasonable structure, beautiful appearance, highly detection sensitivity and stable behaviors. It is characterized by high detecting sensitivity and stable & reliable performance.
Scope of application:
EJH-28 is mainly used for detecting the metal chips inside the sea-food , fishery, noodle, frozen food, sugar, tea, pharmaceutical products etc.
Product characteristic:
1: Stainless steel shell , anti-erosion and long life span .
2: The conveyor belt is made of nonpoisonous material
3: Strong transport drive, all the products below 25kg can be conveyed to be checked.
4; Quick convey speed, it is specially suitable for pipeline operation.
5: When sensor detect a broken needle or over a diameter 0.8mm iron ball, buzzer will sound and conveyor belt will stop. After that, detected products will be return at hand.
6:The performance of the belt conveyer is complied with the American food sanitation standard (FDA), it can be used for transporting the unpacked food directly.
7: Can match the pipeline operation or automatic control device.
8. Good waterproof, dustproof performance.
Main Features:
LCD display & DSP digital signal processing technology
Recording and memory function: able to store up to 20 kinds of different products.
Dual-channel and dual-frequency detecting to detect Fe and non-ferrous metals like stainless steel respectively.
Recording and memory function: able to store up to 20 kinds of different products.
360 degree phase adjustment technology adopted to decrease product effect and improve sensitivity in non-ferrous metal detecting.
With high stability: no alarm even if being hammered. Can be integrated into production line or automatic equipment.
Way of alarming: sound and light alarm, stop running automatically.
Technical parameters:
1. Inspection window size:
Normal size of inspection window(mm): 120(H)X400(W)
Normal length of conveyor: 1800mm, normal height of conveyor to ground: 650mm
     Remark: The measures of the sizes can be designed according customer's requirement.
2: Sensitivity:Diameter of 0.8 mm steel ball, weight of 1.2-1.5g Lead, copper and other globular metal parts.
3: Electrical source:Â 220V 50/60Hz
4: Power : 120W
5: Alarm: Audible and visual alarm, automatic stop
6: Normal Size(mm): 1740(L)X900(W)X1030(H)
7: Gross Weight: approx 370Kgs  Net Weight: Around 310kgs.
Table of Sensitivity
25*8cm 30*10cm 40*15cm 50*25cm 60*35cm
FE ≥0.5mm ≥0.8mm ≥1.0mm ≥1.5mm ≥2.0mm
SUS ≥1.2mm ≥1.5mm ≥2.0mm ≥3.0mm ≥4.0mm
Remark: the above data is empty-loaded machine sensitivity. The real sensitivity will be lower on condition of different products being tested.Â
Food Processing Metal Detector Machine with Customized OEM Service
Advanced technique of electrical & mechanism designs is adopted for EJH series automatic conveying metal detector which have reasonable structure, beautiful appearance, highly detection sensitivity and stable behaviors. It is characterized by high detecting sensitivity and stable & reliable performance.
Scope of application:
EJH-28 is mainly used for detecting the metal chips inside the sea-food , fishery, noodle, frozen food, sugar, tea, pharmaceutical products etc.
Product characteristic:
1: Stainless steel shell , anti-erosion and long life span .
2: The conveyor belt is made of nonpoisonous material
3: Strong transport drive, all the products below 25kg can be conveyed to be checked.
4; Quick convey speed, it is specially suitable for pipeline operation.
5: When sensor detect a broken needle or over a diameter 0.8mm iron ball, buzzer will sound and conveyor belt will stop. After that, detected products will be return at hand.
6:The performance of the belt conveyer is complied with the American food sanitation standard (FDA), it can be used for transporting the unpacked food directly.
7: Can match the pipeline operation or automatic control device.
8. Good waterproof, dustproof performance.
Main Features:
LCD display & DSP digital signal processing technology
Recording and memory function: able to store up to 20 kinds of different products.
Dual-channel and dual-frequency detecting to detect Fe and non-ferrous metals like stainless steel respectively.
Recording and memory function: able to store up to 20 kinds of different products.
360 degree phase adjustment technology adopted to decrease product effect and improve sensitivity in non-ferrous metal detecting.
With high stability: no alarm even if being hammered. Can be integrated into production line or automatic equipment.
Way of alarming: sound and light alarm, stop running automatically.
Technical parameters:
1. Inspection window size:
Normal size of inspection window(mm): 120(H)X400(W)
Normal length of conveyor: 1800mm, normal height of conveyor to ground: 650mm
     Remark: The measures of the sizes can be designed according customer's requirement.
2: Sensitivity:Diameter of 0.8 mm steel ball, weight of 1.2-1.5g Lead, copper and other globular metal parts.
3: Electrical source:Â 220V 50/60Hz
4: Power : 120W
5: Alarm: Audible and visual alarm, automatic stop
6: Normal Size(mm): 1740(L)X900(W)X1030(H)
7: Gross Weight: approx 370Kgs  Net Weight: Around 310kgs.
Table of Sensitivity
25*8cm 30*10cm 40*15cm 50*25cm 60*35cm
FE ≥0.5mm ≥0.8mm ≥1.0mm ≥1.5mm ≥2.0mm
SUS ≥1.2mm ≥1.5mm ≥2.0mm ≥3.0mm ≥4.0mm
Remark: the above data is empty-loaded machine sensitivity. The real sensitivity will be lower on condition of different products being tested.Â
