After experiencing the global financial crisis, the European commercial vehicle industry still has a long way to go. As the largest and most influential commercial vehicle show in Europe and even in the world, the Hannover International Commercial Vehicle Show (hereinafter referred to as "IAA") has never been as urgently needed for innovation, change and development. "New" and "change" are not only embodied in technology and products, but also reflected in the strategic adjustment and shift of market focus of commercial vehicles and parts companies in Europe.

In 2009, European commercial vehicle sales fell by 80%, but the Dutch Hayward Group was hard hit. The group is the largest manufacturer of hydraulic systems for special vehicles in Europe. At the same time, it produces a series of heavy-duty special vehicles and equipment such as pull-arm vehicles and swing-arm vehicles.

Haiwo's joint venture company in China - Haiwo Machinery (Yangzhou) Co., Ltd. Executive Director Tan Hao told reporters that the development of the Haiwo Group is not affected by the financial crisis is important because 10 years ago began in China, India, Brazil And other countries build factories. Currently, Haiwo China's sales account for 35% of the Group's total sales. Collaborating with companies in developing countries and pursuing market diversification has enabled Hayward to survive the financial crisis. It is understood that under the leadership of Haiwo, some of the company's suppliers have also begun to plan to invest in China to build factories.

The joint manufacturer of commercial vehicle safety connectors, the German Yost Group, has the same experience. According to Altman, Asia Pacific president of the group, “The Chinese market is very attractive to us and the company has begun to consider further expansion in China.” The reporter also learned at this IAA that many European companies that build factories in China are There are plans to increase the capacity of Chinese factories. These companies hope to use Chinese factories as their production bases to radiate the surrounding markets.

In stark contrast to this, a group of European commercial vehicle companies with the best technical strength have suffered huge losses in the financial crisis and even faced the fate of bankruptcy. Even so, they still stick to their existing markets and stubbornly believe that their products do not have a market in China. German Croton company is a typical representative.

Frank, the German Sales Director of Crowne, told reporters that the biggest problem they face is weak market demand. He predicted that in the next 3 to 5 years, the German economy will be able to return to its pre-2008 level. When asked if there are plans to develop into emerging markets such as China, Frank said that the company's products are designed and produced in accordance with European standards and requirements, and that the prices are very high and are simply not suitable for sales in China. Establishing a branch company in China is responsible for the local sales and maintenance of products, and the investment cost is too high.

The reporter analyzed that the European commercial vehicle "technical emperors" are unwilling to step out of Europe. There are three main reasons for cooperation with emerging market companies: First, Europe is the main consumer market for high-end commercial vehicles, with advanced products and technology, and profitable sales. They are reluctant to spend their energies in exploring new markets. Second, some companies have experienced painful experiences in the failure of joint ventures in China and are reluctant to return to their sad places. Third, after the financial crisis, European companies have become more cautious in their outward investment, often Need repeated market research and demonstration.

After the outbreak of the financial crisis, the concept of commercial vehicle companies in Europe has changed and the concept of consumers has also changed. It is undeniable that European companies still have the world's top commercial vehicle technology, but the problem is that the European market alone cannot support their subsequent development. From the reporter’s point of view, European companies have to go out and go out, improve their adaptability technology with advanced technologies, and serve the new market, so as to achieve greater development.

HWS Anti-corrosion Pipeline Heat Shrink Sleeve

Product Introduction:
HWS Anti-corrosion Pipeline Heat Shrink Sleeve is also known as heat shrink weld belt/Heat shrinkable weld sleeve (belt), made by irradiation cross-linked polyolefin base material and special sealing hot melt adhesive. WHR Three Layers Heat Shrink Sleeve For Anti-corrosion it has high mechanical strength, stable performance, aging resistance, anti chemical corrosion, sealing, strong adhesive strength, easy to operate, etc.
 
Product Application:
 

a) Pipeline Engineering Tubing Apply to petroleum, nature gas, chemical engineering, fuel gas and others project pipeline network for anti-corrosion of steel pipeline repaired and welded junction.And also apply to corrosion resistant coating for repairing the breakage.
b) Apply to 2PE, 3PE, FBE,PP,CTE anti-corrosion coating pipeline for anti-corrosion of welded junction and bend area.
 
Specification:
When using the heat shrink sleeves, first preheat the pipeline up to 55 degrees Celsius~60 degrees Celsius, and then wrap the joint belt around the treated pipeline with the heat shrink joint belt, make sure that the heat shrink joint belt lap width is more than 50mm, it will shrink at radial direction when the heat effects on it, at the same time the hot melt adhesive start to melt, fill and cover the surface of the pipeline, form continuous and close anti-corrosion system with original pipeline anti-corrosion coating.

Executive Standard: SY/T0413-2002 and SY/T4054-2003 and GB-T23257-2009.
 
Features & Benefits
a) excellent adhesion ability, adhesion range is wide: can adhere with steel, PE, epoxy coating, etc.
b) strong in corrosion resistance:can effectively block a variety of medium permeability and corrosion, aging resistance, environment stress cracking resistance, resistance to UV irradiation.
c) High mechanical strength: compression resistance, shock resistance, shear resistance.
d) Wide use range: can instruct at -25~35 degrees Celsius temperature range.
e) No volatilization, safety in use, can save energy, can protect environment
f) Long service life.
g) Shrink fast, easy to operate, simple to install.
h) low preheat temperature: when preheat -55~60 degrees Celsius, can install it to shrink.

 Other size can customized according to customers' request.

Pipeline Engineering Tubing/sleeves

Pipeline Engineering Tubing,Pipeline Insulation Tape,Heat Shrink Polyethylene,Polyethylene Terephthalate Tubing

KEYUACE Materials Co., Ltd. , http://www.insulationtubing.com